alvarop / usb_c_cable_tester

alvarop/usb_c_cable_tester Issues

Suggestion: Change USB-C connector to a widely available and cheaper 24p one
Updated 3 months ago3
Consider USB-C connector with vertical pins for better soldering
Closed a year ago5
Suggestion: Make SMD pads for LEDs and resistors hand solderable
Updated 4 months ago
Cannot order from JLCPCB because FOXCONN UT11113-11602-7H is unavailable
Updated 5 months ago6
USB 3.0 connector
Closed 6 months ago1
Interpreting the results?
Updated 6 months ago5
Manufacturing defects on the new USB-C receptacle
Closed a year ago2
possible addition to ORDERING.md
Closed a year ago1
Micro-B connector does not sit flush with board
Closed a year ago2
Keep cable shield and ground on separate nets
Closed a year ago9
USB 3.0 Type B instead USB-type A
Closed a year ago1
Consider using 0.3mm vias
Updated a year ago2
3D Printed/laser cut case
Closed 2 years ago2
Unsure if JLCPCB got this right
Closed 2 years ago7
Sockets for USB 3
Closed 2 years ago1