Forum links:
https://forum.mikrotik.com/viewtopic.php?f=9&t=135207
http://www.cyberforum.ru/mikrotik/thread2033981.html
Video how to manually parse music to midi file and how to use that program, check time codes in video description:
https://www.youtube.com/watch?v=g6GZVlYP7X0
| Short Key | Full Key | Description | Example |
|---|---|---|---|
| -h | --help | Print this help message | -h |
| -f | --file | Select input standard midi file (SMF) | -f <input_file.mid> |
| -g | --output-file | Specify output file name. If not set than output will be saved in file with same name as input but with additional suffix | -g <output_file> |
| -o | --octave-shift | Sets the octave shift relative to the original (-10 to +10) | -o -2 //Shifts all notes 2 octaves down |
| -n | --note-shift | Sets the note shift relative to the original | -n 3 //Shifts all notes 3 notes up |
| -t | --fine-tuning | Sets frequency offset for all notes in case when you think your beeper produces beeps at wrong frequencies | -t -10.3 //Shifts all notes for 10.3Hz down |
| -b | --bpm | Sets the new bpm to output file | -b 130 //Sets a new bpm to 130, ignores the original bpm in the file |
| -c | --comments | Adds comments in the form of notes | -c |
- Install conan
- Install CMake
- Go to directory midi_to_mikrotik_converter/build and then type two commands:\
cmake ../ -DCMAKE_GENERATOR_PLATFORM=x64 -DCMAKE_BUILD_TYPE=Release
cmake --build .
If you have some problems with getting Boost library than check available prebuilt packages and configure project to match one of available here: https://conan.io/center/boost?version=1.75.0&os=Windows&tab=configuration\