Brewerslab - Home Brew Brewery Control
Allows a number of flags to be set, the presence of this file can be used to trigger and adjust the behaviour.
- no-ferm-control whilst this flag is present all fermentation control will be disabled.
- single-temp-probe if this flag is present all temperature monitoring will be used from the hltProbe. This is unfortunately sometimes needed if the physical temperature probes are unreliable.
- overrideModeFerm causes pitmTemperature to fix on fermentation with a fixed target of 17 deg (hardcoded in pitmTemperature). Processes validated are pitmRelay.py, pitmTemperature.py and pitmElastic.py. This can be used in an emergency if the governor abandons duties during a fermentation. pitmMonitor which would normally run on the same node as pitmGovernor.py is also validated. In all cases processes need to be restarted when using overrideModeFerm.