Deprecated use gangefors/airdcpp-webclient instead

Using the lastest Version

AirDC++ Web Client Docker image

You must have proper knowledge of Docker to use this image.

Run the application

docker volume create --name airdcpp
docker run -d --name airdcpp \
    -p 80:5600 -p 443:5601 -p 21248:21248 -p 21248:21248/udp -p 21249:21249 \
    -v airdcpp:/.airdcpp \
    -v $HOME/Downloads:/Downloads \
    -v $HOME/Share:/Share \
    algonrey/airdcpp

The web UI will be available on http://localhost.

If you want to run the application on any other port than 80, just update the -p option in the command, e.g -p 5600:5600 to bind to port 5600. See Exposed Ports below for details.

Username / password for the default admin account is: admin / password

Explanation

docker volume create --name airdcpp

This command creates a named volume that will store the application settings.

NOTE Run the volume create command only once.

docker run -d --name airdcpp \
    -p 80:5600 -p 443:5601 -p 21248:21248 -p 21248:21248/udp -p 21249:21249 \
    -v airdcpp:/.airdcpp \ 
    -v $HOME/Downloads:/Downloads \
    -v $HOME/Share:/Share \
    algonrey/airdcpp

This command starts a container using the default settings built into the image, binding the application to port 80/443 (default http/https port) so it's readily available on http://localhost and https://localhost It will also mount Downloads and Share from you home directory, change these according to your personal setup.

Run as non-privileged user

If you'd like to run in a non-privileged container you can do that as well. It might even be preferable since then you get to decide who owns the downloaded files.

docker run -d --name airdcpp \
    -p 80:5600 -p 443:5601 -p 21248:21248 -p 21248:21248/udp -p 21249:21249 \
    -v airdcpp:/.airdcpp \
    -v $HOME/Downloads:/Downloads \
    -v $HOME/Share:/Share \
    -u $(id -u):$(id -g) \
    algonrey/airdcpp

NOTE If you already have run the container as root, the files in the volume might be owned by root. Fix that by chowning the files to the user you run as.

docker run --rm \
    -v airdcpp:/.airdcpp \
    ubuntu:16.04 \
    chown -R $(id -u):$(id -g) /.airdcpp

docker-compose

There is a docker-compose file available to set up the application as a service on a docker host. Just run the following.

docker-compose up -d

Environment

You can configure some aspects of the application when using docker-compose by setting these environment variables before running docker-compose up -d.

UID

Container is started with this user id. Defaults to 0 (root). Usually you want this to be $(id -u).
GID

Container is started with this group id. Defaults to 0 (root). Usually you want this to be $(id -g).
HTTP_PORT

Published HTTP port. Defaults to 5600.
HTTPS_PORT

Published HTTPS port. Defaults to 5601.
TCP_PORT

Published TCP port for incoming connections. Defaults to 21248. If this is changed you have to change it in the application settings as well.
UDP_PORT

Published UDP port for incoming connections. Defaults to 21248. If this is changed you have to change it in the application settings as well.
TLS_PORT

Published TLS port for incoming connections. Defaults to 21249. If this is changed you have to change it in the application settings as well.

Volumes

/.airdcpp

This volume stores the application settings.

NOTE If you mount this directory from your host you will not have the default configuration files in the settings directory. You need to copy them from this repo. The files are found in the .airdcpp directory.
/Downloads

This is the default Download folder, but you can change this in the settings through the web UI.
/Share

This is the default share folder.

Exposed Ports

5600 HTTP port
5601 HTTPS port
21248 TCP and UDP port for incoming connections. You have to publish this on the same port number otherwise clients will not be able to connect.
21249 TCP port for incoming encrypted connections. You have to publish this on the same port number otherwise clients will not be able to connect.

If you want to use other ports for incoming connections you are can change them under Settings>Connectivity>Advanced>Ports in the web UI.

The incoming connection ports are used to be able to be in active mode. This allows you to connect to all peers in a hub, including the ones in passive mode.

Read more about connectivity modes in the official FAQ.

Add/modify admin users

To add/modify adminitrative users to the web interface, run the following.

docker stop airdcpp
docker run --rm -it --volumes-from airdcpp \
    algonrey/airdcpp --add-user
docker start airdcpp

NOTE You must stop the webclient application container before running this command. If you add a user while it's running, the configuration will be overwritten when the application shuts down.

Upgrade

Pull the latest image.
Stop and remove the container.
Start a new container with the same command you started the old one.

Example:

docker pull algonrey/airdcpp
docker stop airdcpp
docker rm airdcpp
docker run -d --name airdcpp \
    -p 80:5600 -p 443:5601 -p 21248:21248 -p 21248:21248/udp -p 21249:21249 \
    -v airdcpp:/.airdcpp \
    -v $HOME/Downloads:/Downloads \
    -v $HOME/Share:/Share \
    algonrey/airdcpp

Enable HTTPS

The image comes with self-signed certificates so you should be able to use HTTPS out of the box. But if you want to generate your own certificates here's how you do it.

NOTE The container must be running.

docker exec -it airdcpp openssl req \
    -subj "/C=US/ST=State/L=City/O=/CN=localhost" \
    -x509 -nodes -days 365 -newkey rsa:2048 \
    -keyout /.airdcpp/Certificates/client.key \
    -out /.airdcpp/Certificates/client.crt

Change the CN string to whatever the domain name or IP you are running your service on. You can also add more information in the -subj string if you want. Check this site for more information on the different fields.

algonrey / docker-airdcpp