icetools provides a development environment for numerical ice flow models/simulations. Nonlinear rheology and Stokes approach are implemented. "Ready to use" programs/scripts are available based on different numerical libraries, from educational to HPC.
This project has been migrated from sourceforge.net to github on February 26th, 2019.
In 2008 the first version of icetools was released. This version was based on the GetFEM++ library and its Matlab (R) interface. A corresponding publication was describing the initial tests and implementation:
A. H. Jarosch, “Icetools: A full Stokes finite element model for glaciers”, Computers & Geosciences, Vol. 34, iss. 8, p. 1005-1014, 2008, doi: 10.1016/j.cageo.2007.06.012.
Later on around 2010-2011 the code was migrated to utilize the FEniCS project.
Here a brief and incomplete list of publications that have utilized icetools:
- A. Wirbel, A. H. Jarosch, and L. Nicholson, “Modelling debris transport within glaciers by advection in a full-Stokes ice flow model,” The Cryosphere, Vol. 12, Iss. 1, p. 189–204, 2018, doi: 10.5194/tc-12-189-2018.
- A. H. Jarosch and M. T. Gudmundsson, “A numerical model for meltwater channel evolution in glaciers,” The Cryosphere, Vol. 6, Iss. 2, p. 493–503, 2012, doi: 10.5194/tc-6-493-2012.
- A. H. Jarosch and M. T. Gudmundsson, “Numerical studies of ice flow over subglacial geothermal heat sources at Grímsvötn, Iceland, using Full Stokes equations,” Journal of Geophysical Research-Earth Surface, vol. 112, p. F02008, 2007, doi: 10.1029/2006JF000540.
- A. H. Jarosch, “Icetools: A full Stokes finite element model for glaciers”, Computers & Geosciences, Vol. 34, iss. 8, p. 1005-1014, 2008, doi: 10.1016/j.cageo.2007.06.012.
Software projects utilize icetools:
icetools requires a functioning installation of the FEniCS project. I recommend you use my singularity container with FEniCS 2016.2 installed. This setup is tested and works. Other versions of FEniCS are currently not supported.
Installation instructions for your system can be found here. My container currently supports singularity version 2.6.
First you need to clone my repo to a directory of your liking.
git clone https://github.com/alexjarosch/icetools.gitNow you can build the singularity container with
cd icetools/FEniCS_container
sudo singularity build fenics_icetools.simg build_scriptThis will take a while, go get some coffee.
When the container is done, the file fenics_icetools.simg will be created, which is the FEniCS_container.
If you don't like to build the container or face troubles doing so, you can download a pre-built container based on the current build_script from the icetools 1.3.0 release here.
This container, called fenics_icetools.simg, can also be used with the current development version of icetools.
To run the 2D case, first move to the icetools directory (maybe you need a cd ..).
Now you can start the 2D case right within the singularity container:
singularity exec FEniCS_container/fenics_icetools.simg python3 icetools_2d_demo.pywhich will run python icetools_2d_demo.py inside the container and place output in your local directory. Consult the singularity documentation to learn more on working with this type of container environment.
After the run is completed, you can visualize with paraview, as icetools is producing VTK files as output.
The result for the velocity (stored in velocity_2D.pvd) should look like this:
The 3D case is executed similarly to the 2D case. As this case has a bigger mesh, you have the choice of running it as a sequential code or in parallel. Both of the below runs will take quite some time, depending on how many mesh nodes you use.
Using just a single core you can run:
singularity exec FEniCS_container/fenics_icetools.simg python3 icetools_3d_demo.pyHowever if you would like to use 6 cores you can utilize mpirun:
singularity exec FEniCS_container/fenics_icetools.simg mpirun -np 6 python3 icetools_3d_demo.pyAfter the run is completed, you can agian visualize with paraview and the 3D velocity should look like this:
