The MC7010 CPE is a 4G/5G outdoor unit produced by ZTE with these specs:
- Network support: 5G SA/NSA Sub-6G/mmWave + 4G LTE Networks TDD/FDD
- Chipset: Qualcomm 5G SDX55M Platform
- CPU: 1x Cortex A7 up to 1.4GHz
- RAM: 256MB
- NAND: 512MB
- LED: Power, Network, LAN, Signal RSSI (three leds)
- 4G LTE Cat: 20
- 5G Specs:
- Max Speed: download up to 3.8Gbps, upload up to 331Mbps
- Bandwidth: Sub-6G@100Mhz, mmWave@800Mhz
- Modulation: Sub-6G DL/UL 256QAM, mmWave DL/UL 64QAM
- Dual Mode: Bridge or Router, there is no embedded Wi-Fi
- Network connectivity: 2.5GbE interface with PoE 802.3af/at (bundled injector)
- Other connectivity:
- USB Type-C with CDROM+RNDIS emulation. It's also used for diagnostic and firmware flashing
- BLE: Used with "Installer Helper App" (Android/iOS) to point the CPE when installed outside
- GPS: Some HW revs has also embedded GPS used by ISP to lock device connection on a specific location, it can be disabled. Doesn't seems to work on 7010D revs from my test
- Dock or Wall-Kit: based on the hardware version, you will have also a dock to use the unit inside
- Hardware Revision
- Partition & Filesystem Info
- LTE/NR5G CA Combos
- Play with EDL tools and partitions
- Enter 'Emergency Download Mode' (EDL) if your unit is bricked
Any help is really appreciated, feel free to open a PR to fix or add informations 😊