Docker ARM qBittorrent VPN

Docker image dedicated to ARMv7 processors, hosting a qBittorrent client with WebUI while connecting to OpenVPN.

This project is based on an existing project, modified to work on ARMv7 WD My Cloud EX2 Ultra NAS.
See GitHub repository: https://github.com/haugene/docker-transmission-openvpn

This image is part of a Docker images collection, intended to build a full-featured seedbox, and compatible with WD My Cloud EX2 Ultra NAS (Docker v1.7.0):

Docker Image	GitHub repository	Docker Hub repository
Docker image (ARMv7) hosting a Transmission torrent client with WebUI while connecting to OpenVPN	https://github.com/ahuh/docker-arm-transquidvpn	https://hub.docker.com/r/ahuh/arm-transquidvpn
Docker image (ARMv7) hosting a qBittorrent client with WebUI while connecting to OpenVPN	https://github.com/ahuh/docker-arm-qbittorrentvpn	https://hub.docker.com/r/ahuh/arm-qbittorrentvpn
Docker image (ARMv7) hosting SubZero with MKVMerge (subtitle autodownloader for TV shows)	https://github.com/ahuh/docker-arm-subzero	https://hub.docker.com/r/ahuh/arm-subzero
Docker image (ARMv7) hosting a SickChill server with WebUI	https://github.com/ahuh/docker-arm-sickchill	https://hub.docker.com/r/ahuh/arm-sickchill
Docker image (ARMv7) hosting a Medusa server with WebUI	https://github.com/ahuh/docker-arm-medusa	https://hub.docker.com/r/ahuh/arm-medusa
Docker image (ARMv7) hosting a Jackett server with WebUI	https://github.com/ahuh/docker-arm-jackett	https://hub.docker.com/r/ahuh/arm-jackett
Docker image (ARMv7) hosting a NGINX server to secure SickRage, Transmission and qBittorrent	https://github.com/ahuh/docker-arm-nginx	https://hub.docker.com/r/ahuh/arm-nginx

Installation

Preparation

Before running container, you have to retrieve UID and GID for the user used to mount your torrents data directory:

Get user UID:

$ id -u <user>

Get user GID:

$ id -g <user>

The container will run impersonated as this user, in order to have read/write access to the torrents data directory.

Run container in background

$ docker run --name qbittorrent --restart=always -d \
		--add-host=dockerhost:<docker host IP> \
		--dns=<ip of dns #1> --dns=<ip of dns #2> \
		-p <webui port>:8082 --cap-add=NET_ADMIN \
		--device=<tunnel network interface> \			  
		-v <path to torrent dir to scan>:/torrentdir \
		-v <path to completed dir>:/completeddir \
		-v <path to incompleted dir>:/incompletedir \
		-v <path to qBittorrent configuration dir>:/config/.config/qBittorrent \
		-v /etc/localtime:/etc/localtime:ro \
		-e "OPENVPN_PROVIDER=<openvpn provider>" \
		-e "OPENVPN_CONFIG=<openvpn configuration>" \
		-e "OPENVPN_USERNAME=<openvpn user name>" \
		-e "OPENVPN_PASSWORD=<openvpn password> \
		-e "OPENVPN_OPTS=--inactive 3600 --ping 10 --ping-exit 60" \
		-e "LOCAL_NETWORK=<local network ip/mask>" \
		-e "PUID=<user uid>" \
		-e "PGID=<user gid>" \
		ahuh/arm-qbittorrentvpn

$ ./docker-run.sh qbittorrent ahuh/arm-qbittorrentvpn

(set parameters in docker-run.sh before launch, and generate a docker-params.sh to store secret OpenVPN parameters, as described in docker-run.sh)

Configure qBittorrent

The container will use volumes directories to store torrent files, downloaded files, and configuration files.

You have to create these volume directories with the PUID/PGID user permissions, before launching the container:

/torrentdir
/completeddir
/incompletedir
/config/.config/qBittorrent

The container will automatically create a qBittorrent.conf file in the qBittorrent configuration dir (only if none was present before).

Authentication is enabled in WebUI. The default credentials (you may change them in WebUI settings) are:
- Login: admin
- Password: adminadmin
This section will be automatically added to prevent manual validation at first start:

[LegalNotice]
Accepted=true

The following parameters will be automatically modified at launch for compatibility with the Docker container:

[Preferences]
...
Downloads\SavePath=/completeddir
Downloads\TempPathEnabled=true
Downloads\TempPath=/incompletedir
Downloads\ScanDirs=/torrentdir

With PIA VPN, the following parameter will be automatically modified at launch if port forwarding is available:

[Preferences]
Connection\PortRangeMin=XXX

If you modified the `qBittorrent.conf` file, restart the container to reload qBittorrent configuration: ``` $ docker stop qbittorrent $ docker start qbittorrent ```

HOW-TOs

Get a new instance of bash in running container

Use this command instead of docker attach if you want to interact with the container while it's running:

$ docker exec -it qbittorrent /bin/bash

$ ./docker-bash.sh qbittorrent

Build image

$ docker build -t arm-qbittorrentvpn .

$ ./docker-build.sh arm-qbittorrentvpn

ahuh / docker-arm-qbittorrentvpn