ahradnansky / GearIndicator

Gear Position Indicator for Kawasaki and Suzuki bikes using communication with ECU over ISO9141 / K-Bus protocol. Someone may like this.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

GearIndicator

Gear Indicator for Kawasaki and Suzuki bikes using communication with ECU over ISO9141 / K-Bus protocol

This project I implemented couple of years ago. We bought Kawasaki Z750 that time and needed to have gear indication which apparently Kawasaki didn't have installed. About 30 of these were installed on different Kawasaki an Suzuki bikes in following years. Just dont want this project to throw away and forget. Maybe someone will like it.

Project structure

Project has hardware and software part. Content of directories as described below.

 __Eagle

 Hardware scheme and PCB created in CadSoft Eagle (Autodek Eagle now).  Indicator has 2 PCBs. DISP - PCB with 7 segment display and Controller. PWR - PCB with voltage regulator and ISO9141 interface IC.

 __HWcomponents

 Datasheets of all HW components used.

 __Manuals

 We have created couple of installation manuals for Kawasaki and Suzuki bikes. Existing PDFs are here.

 __SketchUp

 3D model of the final product. Prepared to be placed to the potting box. Final product with soldered cable was placed into potting box (type and data in _HWcomponents folder).  Then Araldite expoxy was used for potting. Here you will find PCB 3D model as well as 3D model of the completed device.

 GearIndicator

 Source code in C. Design is based on ATmega328p controller. Atmel Studio (Microchip Studio now) was used as a development IDE.

About

Gear Position Indicator for Kawasaki and Suzuki bikes using communication with ECU over ISO9141 / K-Bus protocol. Someone may like this.

License:GNU Lesser General Public License v2.1


Languages

Language:C 100.0%