libratbag is a configuration library for gaming mice. It provides a generic way to access the various features exposed by these mice and abstracts away hardware-specific and kernel-specific quirks.
libratbag exports the devices over a DBus daemon called ratbagd, see the ratbagd DBus Interface description.
libratbag uses the meson build system which in turn uses ninja to invoke the compiler. Run the following commands to clone libratbag and initialize the build:
git clone https://github.com/libratbag/libratbag.git
cd libratbag
meson builddir --prefix=/usr/
And to build or re-build after code-changes, run:
ninja -C builddir
sudo ninja -C builddir install
Note: builddir is the build output directory and can be changed to any
other directory name. To set configure-time options, use e.g.
meson configure builddir -Denable-documentation=false
Run meson configure builddir to list the options.
To run ratbagd, simply run it as root sudo ratbagd. However,
ratbagd is intended to run as dbus-activated systemd service and installs
the following files:
/usr/share/dbus-1/system.d/org.freedesktop.ratbag1.conf
/usr/share/dbus-1/system-services/org.freedesktop.ratbag1.conf
/usr/share/systemd/system/ratbagd.service
These files are installed into the prefix by ninja install, see also the
configure-time options -Dsystemd-unit-dir and -Ddbus-root-dir.
Developers are encouraged to simply symlink to the files in the git
repository.
For the files to take effect, you should run
sudo systemctl daemon-reload
sudo systemctl reload dbus.service
And finally, to enable the service:
sudo systemctl enable ratbagd.service
This places the required symlink into the systemd directory so that dbus activation is possible.
libratbag has two main components, libratbag and ratbagd. The former is a library to access the devices. It consists of the front-end API and wrapper code, and the back-end HW-specific drivers:
+-----+ +-----+ +-----------+ +----------+
| app | -> | API | -> | hw-driver | -> | protocol | -> device
+-----+ +-----+ +-----------+ +----------+
The API layer is HW agnostic. Depend on the HW, the protocol may be part of the driver implementation (e.g. etekcity) or a separate set of files (HID++). Where the protocol is separate, the whole known protocol should be implemented. The HW driver then only accesses the bits required for libratbag. This allows us to optionally export the protocol as separate library in the future, if other projects require it.
libratbag relies on a device database to match a device with the drivers. See the data/devices/ directory for the set of known devices. These files are usually installed into $prefix/$datadir (e.g. /usr/share/libratbag/).
To add a new device to libratbag, simply drop a new device file into that directory and restart ratbagd. See the data/devices/device.example file for guidance on what information must be set.
If the device doesn't work after adding the device file, you'll have to start reverse-engineering the device-specific protocol. Good luck :)
git clone https://github.com/libratbag/libratbag.git
Bugs can be reported in the issue tracker on our github repo: https://github.com/libratbag/libratbag/issues
libratbag discussions happen on the input-tools mailing list hosted on freedesktop.org: http://lists.freedesktop.org/archives/input-tools/
A number of device-specific notes and observations can be found in our "device-notes" repository: http://libratbag.github.io/device-notes/
libratbag is licensed under the MIT license.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: [...]
See the COPYING file for the full license information.
