Automated start sequencer for the Creekfleet sailing group.
By default, runs the following sequence for each of the number of requested starts:
| Horns | Time to start |
|---|---|
| 3 long | 3:00 |
| 2 long | 2:00 |
| 1 long, 3 short | 1:30 |
| 1 long | 1:00 |
| 3 short | 0:30 |
| 2 short | 0:20 |
| 1 short | 0:10 |
| 1 short | 0:05 |
| 1 short | 0:04 |
| 1 short | 0:03 |
| 1 short | 0:02 |
| 1 short | 0:01 |
| 1 long | START |
Also has a mode selectable during idle operation for the ISAF Rule 26 start:
| Horns | Time to start |
|---|---|
| 1 short | 5:00 |
| 1 short | 4:00 |
| 1 long | 1:00 |
| 1 short | START |
| Function | Arduino Pin |
|---|---|
| Horn | D12 |
| Compressor | D11 |
| Pressure Gauge | D35 (A16) |
| UP.LED | D24 |
| UP.Switch | D25 (active low) |
| DOWN.LED | D26 |
| DOWN.Switch | D27 (active low) |
| SELECT.LED | D28 |
| SELECT.Switch | D29 (active low) |
| BACK.LED | D30 |
| BACK.Switch | D31 (active low) |
| LCD.VO | A22 (DAC1) |
| LCD.RS | D13 |
| LCD.RW | D14 |
| LCD.E | D15 |
| LCD.DB0 | D16 |
| LCD.DB1 | D17 |
| LCD.DB2 | D18 |
| LCD.DB3 | D19 |
| LCD.DB4 | D20 |
| LCD.DB5 | D21 |
| LCD.DB6 | D22 |
| LCD.DB7 | D23 |
| LCD.Red BL | D36 (PWM) |
| LCD.Green BL | D38 (PWM) |
| LCD.Blue BL | D37 (PWM) |