Giters

adrianlungu / OpenCore-Z490-UD-rev-10

Repository for EFI, BIOS and other configurations required for booting OpenCore on Gigabyte Z490 UD

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Z490-UD-rev-1.0 running on OpenCore 0.8.1 (Monterey)

System Specs

  • MB: Gigabyte Z490 UD Rev 1.0
  • CPU: Intel i7 10700
  • GPU: Radeon RX 6600

BIOS Settings (Needs To Be Updated)

  • Bios Version: F20

BIOS Features

Disabled

  • Fast Boot
  • Secure Boot
  • VT-d
  • SuperIO
    • Serial Port [ fixes stuttering ]
  • Legacy USB Support

Enabled

  • 4G Decoding
    • Re-size BAR support: Auto
  • Hyper-threading
  • CSM Support [my system won't properly boot without this on due to the GPU]
    • Windows 10 Features: Other
    • Storage Boot Option Control - UEFI

What's Working

  • Installation
  • Booting
  • GPU
  • Bootcamp
  • Sleep
  • External Audio (USB Audio Card)
  • USB
  • Bluetooth
  • Graphical Boot Picker
  • MB Audio
  • iGPU

My setup does not use iGPU or MB Audio therefore these features have not been implemented n'or tested. Feel free to open an issue or make a PR to add support for these!

How can I use this ?

You can just use the EFI folder in the repository as is to boot either a Monterey installation disk or boot into your existing Mac installation.

Do test using an USB stick before overwriting any existing Clover/OpenCore installation as issues could occur.

If you find a better configuration for these specs, feel free to make a pull request or open an issue!

Special Thanks To

About

Repository for EFI, BIOS and other configurations required for booting OpenCore on Gigabyte Z490 UD