adithya-m08/stanley

Stanley

This is the source for my autonomous drone project, Stanley.

It makes use of the OAK-D Lite for detecting people with depth (TinyYOLO v4), and then uses a subsumption architecture to send control signals via MAVLink to a drone to follow the closest person.

The full project is intended to run on an NVIDIA Jetson Nano, but should work on any platform that can talk via MAVLink, and can run depthai.

INFO: This project is very much work-in-progress. It should be functional, but be prepared to dive into the code to fix things.
WARNING: I take no responsibility if you run any of this code on your own drone. You do so at your own risk.

Getting Started

I went through the process here to setup my own drone: https://docs.luxonis.com/en/latest/pages/tutorials/first_steps/

run ./setup.sh to install dependencies
python utils/camera.py is for debugging Yolo detections and FPS
./integration.sh to run SITL integration tests
python sitl.py to run virtualised SITL mode with direct person control
cd visualiser && yarn serve to run the SITL frontend
python src/main.py to run the full system - see the help it logs with -h

Testing (SITL)

A full SITL environment is used for testing, and I have built a visualisation tool in vue to serve as a frontend.

To use this visualiser, you should open two terminal windows. In the first, run:

cd visualiser
yarn install
yarn serve

This will start the visualiser UI, which will be available on localhost:8080. This communicates via WebSockets to the SITL backend, which runs the Core class internally, as well as a mocked camera instance.

Then, in the other terminal window, run

python sitl.py

This will then start the backend. If the frontend UI doesn't connect automatically, hit refresh in your browser. Data should eventually start coming through - there likely will be a delay before it starts.

Please note: the compiled version of ArduPilot 4.1 (.dronekit/arducopter) is for macOS. You will likely need to change sitl.py to use one for Windows or Linux as required.

Testing (integration tests)

I wrote some integration tests for this project, but definitely don't have full coverage - I mainly used the visualiser to test changes to rules.

Setup on companion computer

Pre-requisites: MAVProxy

The base image for the Jetson Nano likely has Python 3.6 installed, but this code requires 3.9+. To install this new runtime, do the following:

sudo apt install zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev libsqlite3-dev libbz2-dev
cd ~/Downloads
wget https://www.python.org/ftp/python/3.9.12/Python-3.9.12.tar.xz
tar xvf Python-3.9.12.tar.xz
mkdir build-python-3.9
cd build-python-3.9
../Python-3.9.12/configure --enable-optimizations
make -j $(nproc)
make altinstall
python3.9 -m pip install wheel # needed to install pymavlink correctly

Now, you can go through the steps to install DepthAI on the Nano. You should follow the steps specifically for the Jetson family here: https://docs.luxonis.com/projects/api/en/v2.2.1.0/install/#ubuntu

Next, install the Python dependencies:

python3.9 -m pip install dronekit dronekit-sitl pymavlink pytest depthai-sdk gpxpy websockets asyncio

Then, setup the udev rules needed for the OAK-D Lite to function properly:

echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="03e7", MODE="0666"' | sudo tee /etc/udev/rules.d/80-movidius.rules
sudo udevadm control --reload-rules && sudo udevadm trigger

At this point, all the dependencies are installed, and you can grab this repo with:

cd ~
git clone https://github.com/Matchstic/stanley.git

If you're using MAVProxy already on the system, make sure to start it with --out 127.0.0.1:14550. Then, you can run python3.9 src/main.py --uri 127.0.0.1:14550

OPTIONAL

You can setup a systemd service to load main.py on boot. To do this, update the various parameters inside <> in stanley.service. Then, you can run:

sudo cp stanley.service /lib/systemd/system/
sudo systemctl enable stanley.service

License

Licensed under GPLv3.

adithya-m08 / stanley