achim1 / muonic

A python gui for QNet DAQ card experiments

http://achim1.github.io/muonic/

achim1/muonic Issues

QT5 bindings
Updated 3 years ago1
Muon Rates - Fixed run
Updated 8 years ago
GPS sensor works, but "Invalid" in GUI
Updated 8 years ago5
Change DAQ Trigger/Channel Settings if necessary when starting decay or velocity measurement.
Updated 9 years ago1
Add line to all relevant files (L/D, P, R) when starting a decay or velocity measurement.
Updated 9 years ago1
Puls Analyzer
Updated 9 years ago
Start/Stop-Funktion auch für Puls-, Lebensdauer- und Geschwindigkeitsmessung
Updated 9 years ago
Geschwindigkeitsmessung: Fitparamter
Updated 9 years ago
Muon decay measurement with CosMO detectors: problem with veto
Updated 9 years ago8
Rename L files to D files to be constistent with English naming
Updated 9 years ago
The fit to a histogram is unstable and the result varies strongly with the selected range.
Updated 9 years ago
Add Status Text to Decay and Velocity Widgets.
Updated 9 years ago
Change Check Box in Velocity Widget to Start and Stop Button
Updated 9 years ago
Change check box in Decay Widget to Start and Stop Button
Updated 9 years ago
'Status': does not show properly the muon decay configuration
Closed 9 years ago7
"Writing P-File" doest not appear in status
Closed 9 years ago1
Add runtime to decay measurment
Closed 9 years ago1
Status under muon velocity
Closed 9 years ago
Start rate measurement together with mu decay measurement
Closed 9 years ago8
latex dependeny
Updated 9 years ago
muon decay and flight time: new measurement does not start with new plot
Updated 9 years ago3
some problem about installing the muonic
Closed 9 years ago9
trigger rate and channel rate do not match if used in single trigger mode with one detector
Updated 9 years ago3
Add possibility to check status and software settings of ongoing measurement
Updated 9 years ago
extend automatic plot range of trigger rate to a commonly used measurement time (5 or 10 min)
Updated 9 years ago1
Time in fils is different time zone
Closed 9 years ago
Pulsefilenames date format not consistent
Closed 9 years ago8
Change help -> manual to website with manual and put it first
Closed 9 years ago1
Link DAQ user manual in help menu
Closed 9 years ago
Advanced configuration -> Readout intervall: "intervall" should be capitalized
Closed 9 years ago1
a new tab with only trigger counts as a huge number
Updated 9 years ago1
Muon rates: daq time sometimes not shown in multiplicities of 5s
Closed 9 years ago1
Add logging info that prints fit results for decay and velocity.
Updated 9 years ago
daq time does not start with "start run" when starting for the first time
Closed 9 years ago10
Is it wanted that the trigger is "off" (so not displayed) if coincidence is set to single?
Closed 9 years ago4
muon decay: 2 fits shown at the same time
Closed 9 years ago1
Muon decay fit: fit-range with decimal points
Closed 9 years ago
'Help section' neither technical documentation nor Manual open
Closed 9 years ago4
"scaler" is not an english word
Closed 9 years ago3
Unify "coincidence" in settings and "trigger”
Closed 9 years ago
flight time measurement: no fitline shown
Closed 9 years ago6
Error on velocity measurement
Closed 9 years ago
Decay plot: fit leads to histogram not shown completely
Closed 9 years ago4
ZeroDivisionError in Rate Calculation
Closed 9 years ago2
I/OError when quiting muonic
Closed 9 years ago
What happened to the sphinx documentation?
Closed 9 years ago
Velocity measurement: attribute error 'QTabWidget' object has no attribute 'pulseextractor'.
Closed 9 years ago1
Should Muonic use the matplotlibrc of the user or its own style?
Closed 9 years ago3
Muonic doesn't start on SL6 with matplotlib 1.4.2
Closed 9 years ago2
'warning: 2D hist input should be....' when starting muoinc
Closed 9 years ago2