acche / Snell-install-On-Ubuntu18.04

Snell-Protocol Install On Ubuntu18.04

About: https://github.com/surge-networks

Step1:Downlaod File from Github

$ sudo wget https://github.com/surge-networks/snell/releases/download/v2.0.4/snell-server-v2.0.4-linux-amd64.zip

Step2:Unzip File

$ sudo unzip snell-server-v2.0.4-linux-amd64.zip

Step3:Move File to "/usr/local/bin/"

$ sudo mv snell-server /usr/local/bin/

Step4:Create An File "snell.service" in "/etc/systemd/system/"

$ sudo touch /etc/systemd/system/snell.service

Step5:Editor "snell.service":

[Unit]
Description=Snell Proxy Service
After=network.target

[Service]
Type=simple
LimitNOFILE=32768
ExecStart=/usr/local/bin/snell-server -c /etc/snell/snell-server.conf

[Install]
WantedBy=multi-user.target

Step6:Create An File "snell-server.conf" in "/etc/snell/"

$ sudo touch /etc/snell/snell-server.conf

Step7:Editor "snell-server.conf"

[snell-server]
listen = 0.0.0.0:13873	#Listening port
psk = xxxxxxxxxxxxxx	#your psk
obfs = tls		#http/tls

Step8:Start with OS:

$sudo systemctl daemon-reload  
$sudo systemctl start snell.service		#Start snell service
$sudo systemctl enable snell.service		#Enable Start with OS
$sudo systemctl status snell.service		#snell service status

Step9:Config for "Clash for Windows":

-name:example  		#Remark
type:snell
server:xxx.xxx.xxx.xxx	#your vps addres
prot:"13281"		#Listening port
psk:xxxxxxxx		#your psk
obfs-opts:
	mode:tls

Links:https://github.com/surge-networks

enjoy it!