Gigabyte H610I DDR4 EFI Hackintosh

[GUIDE] Installing macOS Monterey (12.x) on Gigabyte H610I DDR4 [OpenCore 0.8.2]

UPD 28.08.2023:

System updated to MacOS Venture 13.5. Fixed minor problems.
Don't forget update serial number for MacPro 7.1.

UPD 28.12.2022:

fixed with Processor type on About This MacOS
System updated to MacOS Monterey 12.6.2. I recommend update, because update fixed problems with memory manager, when system slowed down durning load app.

Overview

My computer on base 12gen Intel. Motherboard is Gigabyte H610I DDR4 with MacOS 12.x. All devices work very well. Sleep-mode works.

Performance

Specs

CPU: 12th Gen Intel(R) Core(TM) i3-12100F
RAM: 2x32Gb DDR4 A-Data Premier [AD4U320032G22-SGN] 3200 Mhz
SSD: 256Gb 2.5" Digma Run S9 DGSR2256GS93T, SATA III
GPU: 8Gb Sapphire Pulse AMD Radeon RX6600
Ports: USB 2.0/USB 3.0/LAN/3'5 Jack
Case: Fractal Design Node 202 with riser PCI-e x16 3.0
Power Suppy: 650W SFX Chieftec CSN-650C

Don't work

VGA-port

BIOS settings

BIOS - F5

Disabled:

Fast Boot
VT-d (enable if DisableMapper Quirks set True)
CFG Lock
Secure Boot
Parallel Port
Serial Port
Resizable BAR Support

Enabled:

VT-x
UEFI startup mode
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 10 UEFI Mode
PCI-e x16 switched to Gen3.0 (If Videocard connect to PCI-e x16 Riser)

Creating USB

I recommend to create on the USB-flash with USB3.0, because the install will very long.

Read Dortania GUIDE for creating USB bootloader

Createinstallmedia method

This is the same mechanism you would use to create a USB installer for a real Mac Monterey.

It is a single line, executed in Terminal:

sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

USB bootloader is ready.

Post Installation

After installation mount local EFI disk. Terminal:

sudo dislutil list

sudo diskutil mount disk0s1 (see diskutil list)

Copy EFI folder to EFI partition.

OC - boot-args:

keepsyms=1 debug=0x100 agdpmod=pikera -wegnoigpu alcid=66

Reboot system. MacOS Monterey is ready.

Enjoy it!