RouteOpt

Note:

RouteOpt solves the capacitated vehicle routing problem (CVRP) and the vehicle routing problem with time windows ( VRPTW). Please cite our paper Two-Stage Learning to Branch in Branch-Price-and-Cut Algorithms for Solving Vehicle Routing Problems Exactly if you use RouteOpt for your research.
RouteOpt for academic use only.

The solver consists of the following modules:
1. Default Setting (Setting I): Full-fledged version with all functionalities enabled, offering the best overall performance.
2. Setting II: For comparing different branching strategies.
3. Setting for open instances: Requires access to supercomputing resources. Detailed explanations of these features can be found in our paper. For specific usage, please refer to the User Manual.
RouteOpt employs a novel two-stage learning-to-branch module. The current parameter configuration is suitable for most instances, except for ones where pricing is extremely challenging (e.g., CVRP instances with long routes). For such instances, the parameters need to be adjusted according to our recommendations in the User Manual.
The VRPTW module of RouteOpt is currently optimized for solving type-2 instances (ones with very loose capacity constraints) fast, and is not suitable for type-1 instances. This is due to the adaptive strategies mentioned in Bucket Graph.
The workflow design, computational techniques, and output style of RouteOpt pay a high tribute to VRPSolver. We are deeply grateful for Drs. Artur Pessoa, Ruslan Sadykov, Eduardo Uchoa, François Vanderbeck, and others who have contributed to the VRPSolver. Special thanks go to Dr. Ruslan Sadykov for providing us access to the VRPSolver and helping us tune it. Without the VRPSolver, RouteOpt would not have been possible.

Requirements

CMake version 3.16 or higher (required).
Eigen version 3.4.0 or higher (required).
XGBoost version 1.4.2 or higher (required).
GUROBI version 10.0 or higher (recommended).
Boost version 1.76.0 or higher (recommended).
CVRPSEP (recommend this revised fork: https://github.com/Zhengzhong-You/cvrpsep). The original is https://econ.au.dk/research/researcher-websites/jens-lysgaard/cvrpsep/.
HGS (recommend this revised fork: https://github.com/Zhengzhong-You/hgs). The original is https://github.com/vidalt/HGS-CVRP. (This is optional for getting good UBs for CVRP instances)

Please ensure these requirements are met before proceeding with the following steps.

Link Depencices

Step 1: Clone the RouteOpt repository:

https://github.com/Zhengzhong-You/RouteOpt.git

Step 2: Construct the project directory tree:

cd RouteOpt && mkdir Zips Dependency && cd Dependency

Step 3: Build the cvrpsep library:

(obtain the code) && cd cvrpsep
make

Step 4: Download Eigen:

cd ../
wget https://gitlab.com/libeigen/eigen/-/archive/3.4.0/eigen-3.4.0.zip
unzip eigen-3.4.0.zip && mv eigen-3.4.0.zip ../Zips

Step 4.5.1: Build the hgs library (optional): follow the instructions in https://github.com/Zhengzhong-You/hgs. Uncomment the corresponding lines in CMakeLists.txt to enable the hgs library.

Step 4.5.2: Build the xgboost library: follow the instructions in https://xgboost.readthedocs.io/en/latest/build.html.

Please make sure these libraries are built in the Dependency folder.

Step 5: Set the GUROBI_HOME environment variable :

On Linux, use vim ~/.bashrc. On MacOS, use vim ~/.bash_profile to open the corresponding file. Then add the following line to it.


export GUROBI_HOME=<gurobi_root>/<gurobi_version>/<OS>

Example: export GUROBI_HOME=${HOME}/gurobi1000/linux64

After that, use source ~/.bashrc or source ~/.bash_profile to reload the update file.

Step 6: Revise FindGUROBI.cmake:

It's located in <path to solver>/RouteOpt/Application/CVRP/CVRP/package


find_library(<package>_LIBRARY
NAMES <lib>
PATHS "$ENV{<package>_HOME}/lib"
)

Replace the <lib> with the right lib.

For example, if you use gurobi1000, the lib will be libgurobi100.so on Linux and libgurobi100.dylib on MacOS.

Step 7: Revise CMakeLists.txt:

Revise path of Boost Library in the CMakeLists.txt.

for example:


set(Boost_ROOT "/home/yzz/boost_1_83_0")
set(Boost_LIBRARY_DIR "/home/yzz/boost_1_83_0/stage/lib")

Note: Take CVRP as an example, the source code is currently built under /RouteOpt/Application/CVRP/CVRP for personal convenience. However, a more standardized way will be:

Create a build directory:
```
mkdir build
cd build
```
Run CMake and Make:
```
cmake ..
make
```

This process results in the executable file being located in the build directory. Please note, the relative paths of the instances should be adjusted accordingly, which includes the idx folder and the contents of the .ins files (if you use .ins to run the code). We will change to the standardized way in next release. For now, building the code in the CVRP folder is recommended.

Useage

Use the idx/<ins_file.ins> (Recommended)

./CVRP -d idx/<ins_file.ins> -n -u

In this command, -d is followed by .ins file, and -n gets the instance name in the n-th line of the file. Note that -u is an optional parameter to provide an initial upper bound (UB) if a valid one is available. For instance, you can type：

./CVRP -d idx/<ins file>.ins -n 0 -u 1000

This command will read the instance from the 0-th line of the .ins file with the initial UB as 1000.

Note that, if the .ins file contains a UB, it will be automatically read from the file, and the UB provided by -u will be ignored. The .ins files in idx folder now all contain a UB (optimal value). For instance, you can type：

./CVRP -d idx/cvrp_200_200_opt.ins -n 0

Specify the complete path

./CVRP ./../../../DataForCVRP/BML/200_200/CVRP_200_154.vrp -u 30972.0

Additional Information

For details on adjusting:

Log files/outputs,
Parameters,
Branching strategies,

please refer to the User Manual.

a280558071 / RouteOpt