Octopus.Energy 🐙 referral code. You get £50 credit for joining and I get £50 credit.
SolaX Power Modbus custom_component for Home Assistant
Copy the folder and contents of solax_modbus into to your home-assistant config/custom_components folder. After reboot of Home-Assistant, this integration can be configured through the integration setup UI
Tick boxes in configflow have no Text.- Fixed!Only supports reading at the moment., writing to registers not net implemented.Write support for Run Mode, Charge from Grid Mode, Min Battery Capacity & Charge / Discharge rate of batteryGen3 X3 Not yet implemented.Gen3 X3 - Supported.- Only supports Modbus over TCP. Serial / RS485 not yet implemented.
The sensors do not support the new "Energy" Dashboard in 2021.08.x and onwards.Sensors now support the new "Energy" Dashboard in 2021.08.x and onwards. (Gen3 X1 & X3 only, Gen 2 doesn't support it unfortunately. Look at solar_bits.yaml for how to setup the Integration - Integration)- You can only have one connection to the inverter, so you can't use this and one of my yaml packages at the same time.
BMS Connect State
Start and End Times for Force-Time-Mode Formatted
House Load
Import, Export & Solar Daily Energy working in Energy Dashboard
EPIC Version bump to 0.1.0
Issue 1 no longer exists, working config screen!
More Optional Sensors
X3 Support
X1 EPS Sensors
X3 EPS Sensors
New Optional Sensors - Only seem to update when Import / Exporting?
- Consumed Energy Total
- Feedin Energy Total
Total Energy To Grid - Tweaked to see if it returns sensible figure?
SolaX Today's Export Energy - Rounded to two places and moved to Gen3 only
SolaX Today's Export Energy - Rounded to two places and moved to Gen3 only
Added missing sensors to Gen3 X3
- Battery Current Charge
- Battery Voltage Charge
Converted all Sensors to use SensorEntityDescription
Removed Optional Sensors - Now form part of the main Sensor Group, but disabled by default
Updated Energy Dashboard compatibility for 2021.9x Version of Home Assistant
Renamed "Input Energy Charge Today" & "Output Energy Charge Today" to "Battery Input Energy Today" & "Battery Output Energy Today" Now compatible with the Energy Dashboard
Write Support!
- Run Mode
- Charge periods in Force Time Use Mode
- Min Battery Capacity
- Charge / Discharge rate of battery
@mickemartinsson Has done a Swedish Translation
Default names of new select / number
- select.solax_run_mode_select
- select.solax_grid_charge_select
- number.solax_battery_minimum_capacity
- number.solax_battery_charge
- number.solax_battery_discharge
Battery Charge/Discharge Limits Gen 2 - 50Amp (I don't know if this applies to all Batteries on the Gen 2 or just the Pylon Tech. Be very careful!) Every other setup 20Amp
Corrected Gen2 Values
Added missing Language Mappings for Language Register
Added:
EPS Sensors:
- EPS Auto Restart
- EPS Min Esc SOC
- EPS Min Esc Voltage
Gen 3 Sensors:
- Backup Charge End
- Backup Charge Start
- Backup Gridcharge
- Cloud Control (Disabled by default)
- CT Meter Setting (Disabled by default)
- Discharge Cut Off Capacity Grid Mode (Disabled by default)
- Discharge Cut Off Point Different (Disabled by default)
- Discharge Cut Off Voltage Grid Mode (Disabled by default)
- Forcetime Period 1 Maximum Capacity
- Forcetime Period 2 Maximum Capacity
- Global MPPT Function (Disabled by default)
- Machine Style (Disabled by default)
- Meter 1 id (Disabled by default)
- Meter 2 id (Disabled by default)
- Meter Function (Disabled by default)
- Power Control Timeout (Disabled by default)
- wAS4777 Power Manager (Disabled by default)
Gen 3 X3 Sensors:
- Earth Detect X3
- Grid Service X3
- Phase Power Balance X3
Number:
- ForceTime Period 1 Max Capacity
- ForceTime Period 2 Max Capacity
Also corrected "Select Naming" & Adjusted Gen2 rounding
Corrected X3 Inverter Power Scaling
Corrected spelling mistakes
Fixed House Load showing Zero when charging from the Grid. Should also fix House Load showing zero when Battery is empty.