The PSoC 4100S Plus Prototyping Kit enables you to evaluate the PSoC 4100S Plus device and develop with Cypress's fourth-generation, low-power CAPSENSE solution.
To use code from the BSP, simply include a reference to cybsp.h.
- World's Most Reliable, Lowest Power CAPSENSE Solution
- On-board Programmer and Debugger
- CY8CKIT-149 PSoC 4100S Plus Prototyping board
- Quick Start Guide
The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CY8CKIT-149.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.
Components:
- Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.
- BSP_DESIGN_MODUS - This component, enabled by default, causes the Configurator generated code for this specific BSP to be included. This should not be used at the same time as the CUSTOM_DESIGN_MODUS component.
- CUSTOM_DESIGN_MODUS - This component, disabled by default, causes the Configurator generated code from the application to be included. This assumes that the application provides configurator generated code. This should not be used at the same time as the BSP_DESIGN_MODUS component.
Defines:
- CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
- CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
| Clock | Source | Output Frequency |
|---|---|---|
| IMO | 48.0 MHz | |
| CLK_HF | CLK_IMO | 48 MHz |
- System Idle Power Mode: Deep Sleep
- VDDA Voltage: 3300 mV
- VDDD Voltage: 3300 mV
See the BSP Setttings for additional board specific configuration settings.
The CY8CKIT-149 Board Support Package provides a set of APIs to configure, initialize and use the board resources.
See the BSP API Reference Manual for the complete list of the provided interfaces.
- CY8CKIT-149 BSP API Reference Manual
- CY8CKIT-149 Documentation
- Cypress Semiconductor, an Infineon Technologies Company
- Infineon GitHub
- ModusToolbox™
© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2021.