Query and set data on GS105E and GS108E Netgear ProSafe switches.
These are known to work:
- GS105E 1.02.04
- GS108Ev2 1.00.12
- GS108Ev3 2.06.08EN (replies come via unicast)
usage: psl-cli.py [-h] [--interface INTERFACE] [--debug]
[--timeout TIMEOUT]
{discover,exploit,query,query_raw,set} ...
- Older switch firmware (before 2018?) returns responses to the broadcast address.
- Newer switch firmware (after 2018?) return responses to the sender.
- If your interface is not eth0 please specify it, when you call psl.py.
Gives an overview of all available options
./psl.py --help
Discover all ProSafe switches on the local network
./psl.py --interface eth1 discover
Set 802.1Q VLAN VID for port 4 to 1
./psl-cli.py set --passwd "password" --mac B0:B9:8A:57:F6:56 --vlan_pvid 4 1
Query all ports for their 802.1Q VLAN port VID
./psl-cli.py query --mac B0:B9:8A:57:F6:56 vlan_pvid
Required for cross-platform support of MacOS & Linux.
- pip install netifaces
"discover" and "query" were recently tested on
- MacOS 10.15 with python 2.7
- Raspbian Linux 4.19.66-v7+ with python 2.7
Discovery only identifies the first switch that answers.
Newer switches that have web servers may have "Switch Management Mode" set to "Web browser only", which will result in the switch only responding to discovery requests. To use this software, you may login to the web UI and set "Switch Management Mode" to "Web browser and Plus Utility".
"query all" sometimes produces inconsistent results. More reliable responses seem to occur when you query one item at at time.
Feel free to fork the code and do any push request.
https://github.com/Z3po/Netgearizer (We are merging code together.)
- Asbjørn Sloth Tønnesen
- Lars Dennis Renneberg Andersen
- Svenne Krap
- Shane Kerr
- Sven Anders
- Steven Bytnar
See also: http://git.asbjorn.biz/?p=gs105e.git;a=summary
It would be nice if you pay attribution to this project if you use this code.
If you like the projekt, you may
