A simple ATM controller

How To Clone

This project can be cloned by entering

git clone https://github.com/YunOh21/simple_atm.git

into your terminal.

This project is written and tested in Python 3.8.3.

python3 controller.py

Then, follow the instructions displayed on the prompt.

You could make a new card or use an old card.
This system doesn't have a database, so the card's information is always the same. (The system could be enhanced by integrating an h2 database or similar.)
- If you made a new card, the balance is 0.
- If you used an old card, the balance is 999999999.
- You may check or edit these values in class_card.py.
You could select savings/chequing account.
- You could see balance of both accounts.
- If you chose savings account, you could only 'deposit'.
- If you chose chequing account, you could 'deposit' or 'withdraw'.

python3 test_controller.py

This file has 23 test cases for functions in controller.py
Those test cases are written with unittest module in Python3.
You may modify some parameters in the test cases to experiment with values different from those already written.