📋 Please see the Changelog for possible important information !
📢 Disclaimer: Usage of this script happens at your own risk!
For downloading this script it is necessary to have git installed.
If you haven't, please run sudo apt-get install git -y to install git first.
After git is installed, use the following commands in the given order to download and execute the script:
cd ~
git clone https://github.com/th33xitus/kiauh.git
./kiauh/kiauh.sh- Installing Klipper to your Raspberry Pi or other Debian based Linux Distribution.
- Installing of the Moonraker API (needed for Mainsail, Fluidd and KlipperScreen)
- Installing several web interfaces such as Mainsail, Fluidd, Duet Web Control or OctoPrint including their dependencies.
- Installing of KlipperScreen (OctoScreen but for Klipper!)
- Updating of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
- Removing of all the listed installations above.
- Backup of all the listed installations above.
- Build the Klipper Firmware
- Flash the MCU
- Read ID of the currently connected MCU
- and more ...
For a list of additional features please see: Feature List
- Tested only on Raspberry Pi OS Lite (Debian 10 Buster)
- Other Debian based distributions can work
- Reported to work on Armbian too
- During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.
For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:
- ⛵Klipper by KevinOConnor
- 🌙Moonraker by Arksine
- 💨Mainsail by mainsail-crew
- 🌊Fluidd by fluidd-core
- 🕸️Duet Web Control by Duet3D
- 🕸️DWC2-for-Klipper-Socket by Stephan3
- 🖥️KlipperScreen by jordanruthe
- 🐙OctoPrint by OctoPrint
- 🔬PrettyGCode by Kragrathea
- 🤖Moonraker-Telegram-Bot by nlef