mbed client using Raspberry Pi with IT-Pi Shield Author: joseph chen (robot@ittraining.com.tw) WebSite: www.ittraining.com.tw ------------------------------------------- How to build =================== step1: download compiler and set PATH environment step2: cd trunk/git/mbed-client-linux-example #set target device yotta target arm-linux-native #clean up code yotta clean # build code yotta build Note: you have to go to the mDS and login, and then generate the "DEVICE SECURITY CREDENTIALS" for your device(raspberry Pi) How to Execute =================== cd mbed-client-linux-example/build/arm-linux-native/source ./mbed-client-linux-example How to Test =================== Note: login into mDS, and use API console to do some test . POST /GPIO/0/STATE with payload data 27/1 ==> LED ON POST /GPIO/0/STATE with payload data 27/0 ==> LED OFF POST /GPIO/0/STATE with payload data 12/1 ==> Buzzer ON POST /GPIO/0/STATE with payload data 12/0 ==> Buzzer OFF GET /GPIO/0/STATE ==> {"GPIO_STATUS":[{"GPIO":12,"value":0},{"GPIO":17,"value":0},{"GPIO":22,"value":0},{"GPIO":23,"value":0},{"GPIO":24,"value":0},{"GPIO":27,"value":0}]} References ==================== 1)To Deploy mbed IoT cloud http://blog.ittraining.com.tw/2016/07/to-deploy-mbed-iot-cloud.html 2)ARM mbed cloud server https://connector.mbed.com/ 3)Raspberry Pi 上編譯mbed client http://blog.ittraining.com.tw/2016/06/raspberry-pi-mbed-client.html#links 4)ARM mbed cloud slide http://blog.ittraining.com.tw/2016/08/arm-mbed-client-code.html