YCF / qmk_port_ch582

QMK

with wireless support in a single chip.

Overview

This is a porting of QMK keyboard firmware for CH58x series, currently support CH582.

Directory Structure

• CherryUSB, qmk_firmware, mcuboot: Components introduced as submodules, NO any file is modified.

  The qmk_firmware submodule should be able to keep up with upstream.

• CherryUSB_porting, mcuboot_porting: Files used to configure submodules and add them into the building system.

• qmk_porting: The adapter layer for QMK to running on the CH58x chip.

• SDK: Directory for placing WCH SDK, so no IDE is used.

Code Branch

• Master: Support for USB and ws2812 is done, still in development.
• debug: Used for presenting specific issues, ignore if use of QMK is all you want.

Highlights

• BLE/USB/2.4G triple mode (in progress)
• Capability to update along with the QMK repo
• Low power comsumption in wireless modes.

Hardware supporting

Currently only CH582M is tested.

Building

• A WCH-specified toolchain is provided in this repo, if you want to use the public version, you may find it here. Note that you need to add it to your PATH environment variable manually.
• A global defination INT_SOFT is needed or the ISR handlers might not working properly.

Keyboard manufacturers/QMK firmware users

Fork this repository then manually upload you keyboard configuration file to keyboards. You'll be able to use the GitHub Actions to build your firmware online.

Note that currently the configuration file is slightly different from the original QMK ones, you may take this keyboard as a start point.

Platform developers

Documentation about standard build & development flows using Visual Studio Code can be found in the development guide.

Flashing

End users：Use Bootmagic Lite with .uf2 only, or take your own risk of bricking your keyboard.

Developers：You may use the flashing utility.

Community

Discord

概述

这是QMK固件向CH58x平台的移植，主要工作集中在应用层（QMK）和底层硬件之间的接合。

目录结构

• CherryUSB, qmk_firmware, mcuboot: 子仓库，没有修改任何代码。

  其中，QMK固件应当能够随上游仓库随时更新。

• CherryUSB porting, mcuboot_porting: CherryUSB的配置文件。

• qmk_porting: QMK和硬件之间的接合层

• SDK: WCH的SDK, 目前版本V1.5。

分支说明

• Master: 完成了有线键盘所需的基本移植，包括VIA支持。灯目前只支持ws2812.
• debug: 如果你只是来看QMK的，当它是空气即可。

功能亮点

• 三模支持 （无线功能暂不开放）
• 可随QMK上游仓库随时更新，支持QMK的绝大多数功能
• 无线低功耗

硬件支持

目前只测试了CH582M，CH582F应当能够正常工作。

编译

• WCH的工具链已经随附，当然你也可以选择使用公版编译器. 但需要你自行处理构建系统调用问题。
• 如果你确定要头铁，加一个全局宏定义INT_SOFT，否则中断很有可能不会正常工作

键盘生产商/QMK固件用户

Fork我的仓库，手动将你的键盘配置文件上传到keyboards目录下，然后使用页面上方的Actions来在线编译你的固件。

需要注意本仓库目前使用的配置文件与QMK的有一点轻微差异，你可以用这个作为模板自行修改。

开发者

推荐使用Visual Studio Code。

参照这个搭建你的本机开发环境，也可选择Codespace.

烧录

用户：不要使用除Bootmagic Lite以外的方式。

开发者：推荐使用WCH提供的工具。

还不会？

这有个交流群：860356332，欢迎加入。