NSPanel Custom with HA Blueprint
You use our NSPanel version and are satisfied with it? Then we would be very happy about a donation to support our project.
This project allows you to configure your complete NSPanel via a Blueprint with UI.
That means you don't have to customize any code or change any lines in the code.
So you have a nice graphical interface where you can build your NSPanel. And the best thing is, the installation takes only a few minutes.
The goal was to create a version that allows everyone to use the NSpanel fully local without having to deal with programming or reading hours of documentation - AND YES WE DID IT!!!! ;)
NSPanel:
(Home and Buttonpage)
(Lightsettings - Brightness and TEMP Color)
(Colorwheel and Thermostat)
(Coversetting and Weather Forecast)
(NSPanel Settings and Boot Screen)
(HA Device Setting for Example temperature correction)
Blueprint:
Features:
- Easy to use and simple configuration via Blueprint - no change in the code is necessary
- 32 buttons on 4 button pages with long press function for settings (more buttons are also possible)
- Button design is automatically generated based on the selected entity
- Buttons show current brightness and cover position in the button itself
- Buttons label can be assigned via blueprint
- Weather + 5 days weather forecast
- Thermostat + Touch + Relay control for floor heating
- Light control (brightness-slider, colorwheel, TempColor-slider) - via long Press
- Cover control (open, close, position-slider) - via long press
- Settings page (display brightness, display dim brightness, auto-dim, sleep mode, reboot NSPanel)
- Swipe between pages
- Top menu with 10 icons for specific states
- Heating control (hot water)
- Modern design - design easy to change via Adobe Express (free + design template)
- 2 physical switches
- and much more ;)
Pages
Home
- Current weather with button to Weather Forcast page
- Hardware buttons can be freely assigned
- Hardware button label or without label
- Blue line indicates on or off of the entity
- Temperature outside
- Status icons at the top
- Room temperature with button to thermostat page
- Room humidity
- Hot water temperature
- Button to display settings page
Button Page
- 32 Button
- 4 Button pages
- Button design is automatically generated based on the selected entity
- Buttons show current brightness and cover position in the button itself
- Buttons label can be assigned via blueprint
- all buttons with long press function
- automatic detection by long press if it is a light or cover for submenu
- swipe between all pages
- swipe also down and up for fast access to certain pages
Light Settings
- Light current state
- Brightness Slider
- Colorwheel
- TempColor slider
- Jump back to the right button page
Cover Settings
- Open and close cover
- Cover position via slider
- Cover battery value if available (I use Ikea roller blind)
- jump back to the right button page
Thermostat
- Touch Temp control
- Outside temperature
- Hot water
- heating on, off and idle
- Hot water button
Weather Forecast
- 5 days Weather Forecast via swipe (Integration Accuweather - but should also go with another integration)
- Lowest and highest temperature outside
- Date
- Rain probability
- Sunshine hours
- Sun pressure
- Thunderstorm probability
- Wind speed
- Night thunderstorm probability and wind speed
Display Settings
- Restart NSPanel
- Sleep mode - display off after time X
- Display brightness slider
- Display dim brightness slider
- Status Brightness in %
Thanks to:
SmartHome Yourself: https://www.youtube.com/c/SmarthomeyourselfDe_DIY
Masto: https://github.com/masto/NSPanel-Demo-Files
Marcfager: https://github.com/marcfager/nspanel-mf
lovejoy77: https://github.com/lovejoy777/NSpanel
Hellis81: https://github.com/Hellis81/NS-panel