May work on mutiband 12m,10m,6m,4m,2m,70cm,23cm,13cm,6cm,3cm bands (23.5Mhz to 10Ghz) (10Ghz on harmonics mode). Transmit custom CW message and switch to next band.
See scheme.png to connection circuit
See STM32/Core/Inc/config.h for configuration
Use Keil IDE for compile project or use pre-build firmwares
By default, the beacon cycles through frequencies sequentially.
- If connect B11 to GND, Frequency only 2m
- If connect B10 to GND, Frequency only 70cm
- If connect B1 to GND, Frequency only 23cm
- If connect B0 to GND, Frequency only 6cm
- If connect A2 to GND, Frequency only 3cm
- If connect A0 to GND, CW message replaced by long dashes