Woodcat64 / Ender3v2

Ender3v2 Klipper Config Files and Home Assistant Moonraker integration

Creality v4.2.2 board using display port UART to comunicate with Raspberry Pi3+

Home Assistant Moonraker integration

Based on:

https://github.com/denkyem/home-assistant-moonraker

https://github.com/mSarheed/home-assistant-moonraker

https://github.com/Arksine/moonraker/blob/master/docs/example-home-assistant.yaml

https://moonraker.readthedocs.io/en/latest/web_api/#printer-status

1. Create directory packages in your Home Assistant config/ directory

2. Rename moonraker -public.yaml to moonraker.yaml and move it to packages/ directory

3. Edit moonraker.yaml. Change 192.168.x.x:7125 to your Moonraker's API IP address

4. Put folowing in configuration.yaml

homeassistant:
  packages:
    moonraker: !include packages/moonraker.yaml

If rest sensors are not created check that you have access Moonraker's API in your browser. (Again change ip address accordingly).

http://192.168.x.x:7125/printer/objects/query?heater_bed&extruder&print_stats&toolhead&display_status&virtual_sdcard&gcode_move&filament_switch_sensor%20Filament%22

Home Assistant Dashboard example

Cards used:

column 1: entities card with custom:love-lock-card, entities card, custom:bar-card

column 2: glance card, entity card, custom:bar-card, entities card, button cards in horizontal-stack card with custom:love-lock-card

column 3: picture-entity card, picture-entity card with glance card

column 4: entities card

Also vertical-stack cards are used to keep columns together.

Example Dashboard_Printer_tab.yaml file is above