Install this app via Google Play Store : https://play.google.com/store/apps/details?id=wattecoDev.netwo&hl=fr&gl=US
Connect to your Netw'o device. And have a look at the graph to check the current network quality.
After each linkCheckReq the Netwo send on the serial BLE:
\n
TX <SentFrame>/<FrameToSend>\n
After reception of linkCheckAns the Netwo send on the serial BLE:
<nbReceivedFrame>/<nbSentFrame>\n
Gateway : %d \n
TX Margin : %d\n
TX SF :%d \n
RX SNR: %d \n
RX RSSI :%d \n
RX Window:%d\n
RX SF:%d\n
RX Delay:%d \n
Battery:%d\nNetId: %d [option if battery is always measured]
\n\n
After sent all frame the netwo send on the serial BLE:
\n
\n********RESULT**********\n
<ReceivedFrame>/<SentFrame-1>\nPER: <ReceivedFrame*100/(SentFrame-1)>\n
Average GATEWAY:%d \n
Average MARGIN:%d \n
Average SNR:%d \n
Average RSSI:%d \n
********RESULT**********\n\n\n
Command to interact with the Netwo:
S<nbFrameToSend>,<SF>,<ADR>\n =>send <nbFrameToSend> frame (maximum 99) on spcipfied <SF> (from 7 to 12) with <ADR> (1: set ADR)
X => Stop the sending of frame.
MDEVEUI? => ask the actual devEUI
MAPPEUI? => ask the actual appEUI
MDEVEUI<x> => modify the actual devEUI. <x> from 0 to 2. 0: 70b3d5e75e0xxxxx 1: 70b3d5e75e1xxxxx 2: 70b3d5e75e3xxxxx
RST => reboot the netwo.
OFF => switch OFF the netwo.