VoronDesign / Voron-0

Voron 0 CoreXY 3D Printer design

VoronDesign/Voron-0 Issues

Guidler has too much play - possible solution
Updated 4 months ago4
Guidler prone to slight deformation under higher temperatures, resulting in loss in gripping power
Updated 4 months ago
Page 104: Unclear text about the filament sensor
Updated 4 months ago1
Change assembly manual - let Z motor be assembled earlier
Updated 5 months ago2
Lower Z-Cable chain attachment is never mentioned in the manual
Closed 5 months ago1
No indication of whether or not to leave screw in our out of extrusion.
Closed 6 months ago2
Reverse bowden length between motor panel and toolhead too short
Closed 6 months ago1
typo in manual
Closed 6 months ago1
V0.2r1 manual page 107: Teflon coated lead screws should not be lubricated.
Closed 6 months ago1
V0.2r1 manual page 101: Front feet are not identical
Closed 6 months ago1
V0.2r1 manual page 102: Swap left/right image/instruction to follow common left-right reading order
Closed 6 months ago1
V0.2r1 manual page 104: Filament sensor switch should be wired as Normally Open
Closed 6 months ago1
V0.2r1 manual page 85 & 86: Extra M3x35 BHCS called out
Closed 6 months ago1
v0.2r1 manual pg231 typo?
Closed 6 months ago1
Typo on page 30 “the” -> “them”
Closed 6 months ago1
Do the Raspberry PI 3b and pico need separate power for usb connection?
Closed 6 months ago2
Filament sensor foot for V0.2(R0) height
Closed 6 months ago1
Typo in Printed Parts Guide
Closed 6 months ago1
Metadata title of V0.2r1 manual is still "VORON V0.2 Manual"
Closed 6 months ago1
Multi-colour STL of v0.2 SB not loading in cura correctly
Closed 8 months ago1
release notes missing newline
Closed 9 months ago1
Electronics STLs: VHB DIN mount and PCB DIN clip are incompatible
Closed a year ago12
Manual page: 202 (V0.2R1) / 196 (V0.2)
Closed 9 months ago1
Manual page 30 issue
Closed 10 months ago1
Distance between Lower Stain Relief Body Screws and Top A/B Mounts too small to account for compounding tolerances
Updated 10 months ago2
Request to add printed parts list at begining of each section.
Updated a year ago8
Bowden toolhead right fan inlet not aligned properly
Closed a year ago
Add clearance between hotend and x carriage
Closed a year ago4
Config - Sensorless Homing Current & Macro Confusion
Closed a year ago3
Cowling Logo Insert STL Missing?
Closed a year ago1
Voron0.2r1 - [a]_MiniSB_Cowling_x1 HE Fan face only 2 layers (0.4)
Closed a year ago7
0.2r1 BOwden Cowling Error
Closed a year ago1
V0.2 manual: Skirt installation - show method where the skirt is slid on
Closed a year ago1
Recommended OMC motor for Z axis doesn't fit into V0.2
Closed a year ago1
V0.2 manual: Reorder front door installation steps so magnet holder are installed first and than the front door.
Closed a year ago1
V0.2 manual: Installation of the PTFE tube from the spool holder to the hotend missing
Closed a year ago2
CAD model missing 6 nuts on the X Gantry Extrusion
Closed a year ago5
V0.2 manual: Move and change Kirigami info box
Closed a year ago2
V0.2 manual: Random "Top" on page 34
Closed a year ago1
V0.2 manual: Incorrect header on page 227
Closed a year ago1
V0.2 manual: Clarify the preload of nuts on page 27/29
Closed a year ago5
V0.2 display mount can't be slid in like all other skirt parts.
Closed a year ago1
V0.2 manual: High contrast version?
Closed a year ago3
Manual page error
Closed a year ago4
CAD / Real life collision of motor mount and strain relieve plate.
Closed a year ago2
Simplified side panel installation: V0.2 manual / BOM prefer m3x10 BHCS instead m3x8 BHCS
Closed a year ago2
panel mounts STLs for other thickness like V0.1 .. 2mm would be very nice
Updated a year ago1
Sourcing Guide M2 SHCS "Alternative source" URL points at a BHCS listing
Closed a year ago3
SRK E3 V3 Wiring Diagram shows wrong polarity for FANs
Closed a year ago1
Drawings (PDFs) of Rear Panels needs to be re-rendered to match DXFs
Closed a year ago1