Voodoobrew101's repositories
AM32-MultiRotor-ESC-firmware
Firmware for stm32f051 based speed controllers for use with mutirotors
blheli-configurator
Cross-platform application for BLHeli firmware flashing and configuration
FYSETC-Voron-2
FYSETC Kit - Voron-2 kit
Klipper-Config
Tenlog IDEX D3
Remote_control_Power_Wheels_Project
This program is intended to allow 2 inputs and one output for making a remote control power wheels Input one is a pwm signal from the remote reciever Input two is variable voltage from a 5v hall sensor pedal. I think my pedal is not great because the voltage range is pretty small. Output is in the form of a pwm signal that works with RC car speed controllers. There is a govenor conected to an aux channel that agjust the max speed the pedal will alow. I use spektrum remotes wich have a signal range of 1100-1900 pwm The failsafe for spektrum recievers is 1500 if the remote is not turned on. This Sets the Govenor to 50% when the remote is turned off The remote off govener speed can be adjused if your esc has a throttle curve. Set the 50% mark of the throttle curve to what you want the throttle off governor to be. My Forward/Neutral/Reverse switch is 3 position SPDT On-Off-On
TL-D3
Marlin dual X carriage 3d printer firmware source code for tenlog-D3