Vogete / arduino-mesh

Arduino Mesh networking with easy pairing

WeMos Mesh Pairing

Original project with commit history can be found here: https://github.com/Vogete/RUC_F18/tree/master/PIE/Mesh_Project/v2

Requirements

Hardware

• WeMos D1 Mini board, or any compatible ESP8266 or ESP8266EX powered Arduino board.
• Adafruit Neopixel RGD LED strip, or any WS2812B or SK6812 based LED strip.
• At least 1 tactile button per board
• MicroUSB data cable to power and program the Arduino boards

Software

Please note that the version numbers are recommendations that are verified to work!

• Arduino IDE 1.8.2
  • Tested on Windows 10 x64
• esp8266 board 2.3.0
  • Only version 2.3.0 works!
• easyMesh
• FastLED 3.1.3
• ArduinoJson 5.13.2
• SimpleList (ArduLibraries)

Setup development environment

For the software installation, please visit this wiki page.

Setup hardware

For setting up the necessary hardware, please visit this wiki page.