UpstreamData / braiinsTestbench

braiinsTestbench

Created using Python 3.9

• create a virtual environment if needed, then pip install -r requirements.txt

Setup

How to tailor the testbench utility to your use

/get_bos_newest.py

• Gets all of the newest items for /firmware, /system, and the newest /update.tar
• Requires only standard libraries, should work with only needing python 3+ with 3.9 preferred
• Run this every once in a while to ensure firmware is new

/firmware

• Taken from BraiinsOS+ ssh install package at https://feeds.braiins-os.com/ by choosing the newest version that contains am1-s9 and getting the ssh gzip file
• Contains all firmware files for the installation of BraiinsOS+
• Should contain these files -
  • /CONTROL
  • /JSON.awk
  • /boot.bin
  • /fit.itb
  • /jq.awk
  • /stage1.sh
  • /stage2.tgz
  • /system.bit.gz
  • /u-boot.img
  • /uboot_env.bin
  • /uboot_env.config

Can be replaced with the most current version of BraiinsOS for S9, this is for version 21.04

/system

• Taken from BraiinsOS+ ssh install package at https://feeds.braiins-os.com/ by choosing the newest version that contains am1-s9 and getting the ssh gzip file
• Contains all system files for the installation of BraiinsOS+
• Should contain these files -
  • /fw_printenv
  • /ld-musl-armhf.so.1
  • /sftp-server

Can be replaced with the most current version of BraiinsOS for S9, this is for version 21.04

/asicseer_installer.exe

• Used for a robust SSH unlock
• Should never need to be replaced, but can be downloaded from https://asicseer.com/page/security-restoring-ssh

/config.toml

• TOML configuration file, used after install to do a basic configuration of the miner
• Change this as needed, you can change pools, autotuning, and temps currently
• You can also add other current BraiinsOS settings to this file, it is generated in a machine running BraiinsOS in /etc/bosminer.toml

/referral.ipk

• Used as part of the Braiins Partnership program, this is a referral file to be installed along with the firmware
• This can be replaced with a referral file of your own, or you can leave the default if you wish to support us
• Leaving this default will not cost you any of your hashrate, and it can be removed at any time

/update.tar

• Taken from BraiinsOS feeds at https://feeds.braiins-os.com/am1-s9/, this is the most recent *.tar file
• Used to update any devices running BraiinsOS to the newest version if they are on an older version

Can be replaced with the most current version of BraiinsOS for S9, this is for version 21.04