UnaPibaGeek / thebicho

Hardware backdoor for CAN bus.

The Bicho

The Bicho is a hardware backdoor for CAN bus.
By backdooring a car with The Bicho you will able to remotely control that car from any geographical point by injecting CAN frames through SMS commands.

Getting Started

Inside the hardware-schematics folder you will find The Bicho schematics for making your own Bicho. If you don't have the resources for making the hardware, you can get a Bicho ready-to-use contacting by DM to @UnaPibaGeek.

Setup and Usage

For configuration, connection and usage you can read the wiki.
There you will find the following useful information:

• Home
• Get The Bicho hardware
• Download the firmware
  • Connect The Bicho to PicKit3
  • Write the PIC memory
• Load an attack template
  • Switch to Programming-mode
  • Use CBM software
• Backdoor a car
  • Switch to hacking-mode
  • Put the SIMcard
  • Connect to the ODB-II port
  • Wait for ready signal

Disclaimer

We are not responsible for bad uses.

Authors

• Sheila A. Berta - (@UnaPibaGeek).
• Claudio Caracciolo - (@holesec).