Giters
Ultimaker
/
Ultimaker2Marlin
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
188
Watchers:
75
Issues:
86
Forks:
231
Ultimaker/Ultimaker2Marlin Issues
Based on what Marlin version?
Updated
2 years ago
Clairify UltiLCD2 license
Closed
3 years ago
Comments count
2
Action Required: Fix WhiteSource Configuration File - .whitesource
Closed
3 years ago
MESH bed leveling
Updated
3 years ago
Comments count
3
Marlin lite uses M142 for RGBW LED coloring, this M code is allready used, M420 is intended for this.
Updated
4 years ago
Comments count
2
Build MarlinSimulator on Linux?
Updated
5 years ago
Comments count
1
Underextrusion (by factor 8?) since 17.10.1
Closed
5 years ago
M601 does not pause print
Updated
6 years ago
Comments count
2
imported material disappears after power off
Closed
6 years ago
Comments count
3
CardReader::lsDive - buffer overflow during M20 command
Updated
6 years ago
What's the difference with other Ultimaker/Marlin github library?
Closed
6 years ago
Comments count
1
Strange problem with stored material profiles after updating a PLUS upgraded UM2.
Closed
6 years ago
Comments count
9
Reset when entering Print menu
Closed
6 years ago
Comments count
3
Problem with insert material "any sounds"
Closed
6 years ago
Comments count
7
Feature Request - #define Z_DUAL_STEPPER_DRIVERS
Closed
7 years ago
Comments count
1
Reversing material: strange sequence
Closed
7 years ago
Comments count
1
Extrusion at the end on the printing
Updated
7 years ago
Comments count
1
Request: SD card file sort order
Closed
7 years ago
Comments count
1
Bed leveling issue
Closed
7 years ago
Comments count
7
Extruder not work after aborting printing
Closed
7 years ago
Comments count
2
Compiling Marlin
Closed
7 years ago
Comments count
4
Feature Request - Pin code protected maintenance menu
Updated
7 years ago
Comments count
2
Marlin-lite panics when using M42
Closed
7 years ago
Comments count
2
Head fan not controlled (e.g. not even started) during auto PID tuning
Updated
7 years ago
Comments count
5
Changes Required from Main Marlin Branch
Closed
7 years ago
Comments count
7
Error Print of area Commits on Dec 2, 2016
Closed
7 years ago
Comments count
10
Activating serial connectors on the board
Updated
7 years ago
Comments count
2
Extrude on resume print when material changed
Updated
8 years ago
Comments count
5
Endstop stuck detection bug
Closed
8 years ago
Comments count
1
New Ultimaker 2+ firmware through Cura 15.4.5
Closed
8 years ago
Comments count
2
Extended lcd_font_7x5 does not work
Closed
8 years ago
Comments count
4
Bug in new feature related to material type
Updated
8 years ago
Comments count
1
M42 will ignore FAN_PIN
Closed
8 years ago
Comments count
5
#define SDcardDetect -1 does not compile.
Closed
8 years ago
Comments count
2
Does not compile
Closed
8 years ago
Comments count
1
Material name restricted to 8 Characters
Closed
8 years ago
Comments count
3
Display freezed while printing
Updated
8 years ago
separately adjustable extruders
Closed
9 years ago
Comments count
1
Relative mode (M83) persists even when printing UltiGCode
Updated
9 years ago
M20 command cuts file names down to 8.3 format
Closed
9 years ago
Comments count
1
No timeout on material change procedure
Updated
9 years ago
correlate PID error and filament flow to detect filament breaks.
Updated
9 years ago
Comments count
1
Low memory available, stability problems may occur.
Closed
9 years ago
Comments count
2
Trying to verify and compile? Has this happened to you before?
Closed
9 years ago
Comments count
12
Tks.
Closed
9 years ago
Comments count
2
Ultimaker 2 firmware not fault tolerant
Updated
9 years ago
Comments count
2
Imported customized material settings disappear after power cycling
Closed
9 years ago
Comments count
1
Possible false positive temp sensor errors
Updated
9 years ago
Comments count
3
I cannot get it to compile on any other PCB board other than #72
Closed
9 years ago
Comments count
5
15.01-RC8 Material change fails
Closed
9 years ago
Comments count
2
Previous
Next