This project is a VGA card for Apple II computers to ouput a crisp RGB signal to a VGA monitor instead of having to rely on the composite output. This is accomplished by snooping the 6502 bus and creating a shadow copy of the video memory within a Raspberry Pi Pico, then processing the raw video memory contents to output a "perfect" signal.
+------+ +-----+ +-----------+
| 6502 |________________| RAM |______| Composite |
| CPU | System \ +-----+ | Video Gen |
+------+ Bus | +-----------+
| +-----------+
\____| Raspberry |_________________\
| Pi Pico | 640x480 VGA /
+-----------+
These features are currently supported:
- Generates a 640x480@60 VGA signal with 3 bits per color channel using resistor DACs
- Text mode (monochrome)
- Lo-res mode with no color fringing between the chunky pixels
- Hi-res mode with simulated NTSC artifact color
- Mixed lo-res and hi-res modes with monochrome text and no color fringing
- Apple IIe video modes: 80-column text, double-lores, & double-hires (thanks to @dkgrizzly and @Paco1979)
- Soft-monochrome mode to force display as if on a monochrome monitor
- Some Video-7 RGB card extended graphical modes are implemented
I had these goals in mind during design:
- Generate video out to a more modern display - I don't have any old CRTs for displaying composite signals any more and composite to HDMI adapters don't work well.
- Generate crisp video - I wanted "perfect" video output, the way that it should have been barring technical difficulties of displays in 1980. So like, no NTSC artifact coloring where it's not supposed to be.
- Non-invasive - I didn't want to have to solder or modify my logic board.
- Common parts - The parts to build should be cheap and easy to get anywhere, just like the original Apple II
- Open-source - If this helps anyone else make their Apple II better then that's a bonus.
I also wanted to see if a Pi Pico could actually work on an 8-bit CPU bus, since the docs say it should work but there were no code examples.
This is currently a DIY project that several folks have built on their own, ranging from hand-wired prototype boards to custom PCBs and run in their Apple II+'s and IIe's. I consider it to be pretty stable at this point.
Included in this repo are:
- The main expansion board KiCad Project, Schematics, BOM, and Gerber files
- An optional connector board KiCad Project, Schematics, BOM, and Gerber files. (You could also build a custom cable instead)
- The source code for the Pi Pico microcontroller
If you're going to build a card then check the assembly guide and hardware changelog for important notes.
Many thanks go to the folks in the Discussion area to help push this project forward with bug fixes & reports, and design ideas!
Main board
Connector board thanks to @swetland for this idea
In the wild
Here are a few comparisons of the VGA card output vs composite video through a cheap composite -> HDMI adapter
Text
Lores
Hires
DHires
80 Columms
There are a few things that I think are easily possible with this design and I might try to implement:
- loading custom character ROMs from Basic
- synchronizing the VGA signal with the Apple II sync so that IIe software can avoid screen tearing