The powerful and experienced monitoring and recording system can solve the abnormal situation of the farm immediately.
The hash rate statistics at the level of mining pool, and the hash rate of any currency can be seen at a glance
Automatically adjust the working mode and data flow according to the terminal equipment to avoid highly ineffective task sharing
The active defense and filtering system improves the security of the environment and finds hazards in time.
The front-end client has high-performance TCP integration and compression technology. No matter how far the farm is from the mining pool, they can effectively reduce farm delay and prevent all middlemen from attacking.
The commission system compatible with various algorithms can reasonably improve the mine profits.
Built-in algorithm engines can update popular currencies without heating.
The dashboard is perfectly compatible with various devices, with PC, MOBILE, and PAD at a glance.
Perfect control logic, even if the service charge is turned on, the mine pool end will not show that the equipment is offline.
Based on the development of Rust, efficient language brings unparalleled performance.
High-performance, next-generation operation and maintenance experience, which is a professional farm operation and maintenance system-RustMinerSystem brought by the top R&D team and RUST experts in Silicon Valley
(Partial Preview)
Click for free customized version description
Telegram：https://t.me/RustMinerSystem
Telegram：https://t.me/+Qu6RroXYb3IxZGM1
Telegram：https://t.me/+Zrz9d5gUR7YzOTVl
Thanks for the technical support provided by the mine pool😊
For the supported algorithm, the corresponding currency will be updated without heat at any time, and the client 0 will bear the burden
| arithmetic | Support | Relevant currency |
|---|---|---|
| SHA256 | ✅ | BTC、BCH... |
| ETHASH | ✅ | ETC、ETHW、ETHF、ETC+ZIL、ETHW+ZIL、ETHF+ZIL |
| SCRYPT | ✅ | LTC... |
| KHEAVYHASH | ✅ | KASPA... |
| BLAKE2B | ✅ | SC... |
| OCTOPUS | ✅ | CFX... |
RustMinerSystem is subject to the supervision of Hong Kong laws. Please note that the legal requirements of various countries/regions may restrict such products and services. Therefore, this product and service as well as some functions may not be available or may be restricted in some jurisdictions or regions or some users. You should understand and comply with the local laws and regulations. If you use this product, the default representative accepts the above license. If the legal problems caused by this product are irrelevant to this product.
-
Install
Select your applicable operating system
Linux
Run the following shell instructions to run the toolkit
bash <(curl -s -L https://github.com/minerproxy-btc/RustMinerSystem/raw/main/install.sh)After running successfully, you will see the following menu.
Windows
Please download the specified version directly from the Windows directory of this project:
https://github.com/minerproxy-btc/RustMinerSystem/tree/main/windows
To start the Windows version, double-click it.
Linux After the script is run, enter 1 or 2 to select the installation menu language. The following interface is displayed
---------- English Menu ----------
- Install
- Update
- Start software
- Stop software
- Restart software
- Modify startup port
- Remove Linux system connection limit (requires server restart to take effect)
- Set automatic startup
- Disable automatic startup...
- Check program running status
- View error log
- Clear log files
- View current WEB access port
- Uninstall
- Reset account password
- Install specified version [1-16]：
Enter 1 to install
The following message is displayed after the installation is complete
|----------------------------------------------------------------|
Program started successfully, WEB access port is21441, Default account is qzpm19kkx default password is xloqslz913If you are using the default password and port, please change the account password and web access port in a timely manner through the web settings.
If the preceding information is displayed, the installation is successful. Enter the server IP address: port number in the browser to access the background.
3.6.1
Fixed bug in 3.6.0 where sometimes miners would not appear in the device list (without affecting normal use)
3.6.0
Added dnx and mallob proxy forwarding
Added DASH
Added CKB
Added SERO
Added ALPH
Added XMR
Added ZEPH
Added RVN
Added RXD
Added ERG
3.5.0
Re-reconstruct the pumping algorithm and the logic of the computing power statistics chart, and now you can draw accurate computing power regardless of any proportion, no longer because the larger the proportion is set, the more the less is pumped
Optimized the ks3 machine produced by ants
Added the kenc protocol as well as the socks5(next version open socks5) protocol, which can now be opened directly within rust
Increased CKB
Added ZEN
Added HNS
Added LBC
Fixed some bugs where the power statistics were not cleaned up due to upstream issues
Fixed a bug where port exceptions were not cleaned up after port conflicts
Turn off animation effects for smoother pages
Added a disconnected reconnection mechanism, and now frequently disconnected machines can also draw relevant computing power
The only inefficiencies are optimized
3.4.1
[Important Update] Fixed a critical BUG where BTC was not pumping enough water
3.4.0
Rebuilt the computing power statistics, and now the statistical accuracy of computing power in rust has been greatly improved
Thanks to the reconstructed computing power statistics, btc's pumping is now more accurate
Added replacement wallet function
The performance of KA0 1 2 3 3l in the fish pond is optimized, and now the fish pond can also draw a relatively large amount of computing power
Added OCTA support
Added KDA support
Equipped with cfx computing unit
ethash algorithm currency, such as octa, etc., mining machine currency of different protocols work on the same port, and the computing power of different protocols can also be counted normally
3.3.0
RMS client release
Fixed a bug where configuration could not be imported
Added program update log
Fixed a bug where hot update ratio would not take effect
Fixed a bug where setting the mining machine pumping alone would not take effect
Improved the classification display of the port list and added the display of all ports
Greatly optimize the ltc pumping accuracy, improve the calculation and pumping accuracy of other currencies
Fixed an issue where some etc models could not connect
3.2.4
Significantly improve the accuracy of power statistics and pumping for all currently supported currencies
3.2.3
Completely solved kas memory burst problem
3.2.2
Fixed kas slow burst memory bug
3.2.1
Fixed a high invalidity bug caused by the same wallet without the miner name configured
3.2.0
Added support for k1 mining pools
The connection count of ant mining pool is optimized
Added ports for kas series models
Complete lifting of cross-pond pumping restrictions
The configuration of the RMS service is enabled
The accuracy of pumping has been optimized, and now the machine with large computational power fluctuations can also pump a more accurate proportion
Added the option to remove pumping from separate miners
Continuously optimize computing power statistics
3.1.0
Tuning the performance of new algorithms under ETC algorithm
3.0.0
Reconfigured the pumping algorithm, and now all currencies can pump accurately to the thousandth digit
In loss-prone mining pools and machines, it is now possible to ensure that the end customer does not reduce computing power more than the set percentage
The e9pro is perfectly optimized
Refactored the interface, added wallet list, device list filtering criteria and so on
Added the setting of single miner pumping
Optimized the power statistics, now the power statistics are no longer messy
Optimized invalid
2.1.0
Completely solve the jam
2.0.9
Solve the stuck problem
Optimal pumping
2.0.8
Two pumping algorithms are combined
Fix suspended animation again
2.0.7
Fixed an issue with version 6 suspended animation
The problem of insufficient computing power in equilibrium mode is optimized
2.0.6
Optimized power compensation, the power compensation option is now hidden, and power is allocated to all miners by default
Optimized E9pro, now all mining pools can run full E9pro, and the calculation of e9pro in rust is accurate and consistent with the mining pool
Added a pumping mode
Added a mode for connecting mine pools
Optimized mining machine with high computing power
2.0.5
[Important Update] Fixed a bug where RUST was suspended in windows
Fixed high inefficiency of kas Glacier and other chip machines
Compatible with the etc gtv66 chip, improve the etc computing power calculation
Fixed some bugs in power statistics
2.0.4
The default mode of computing power compensation is optimized to further reduce inefficiency
Optimized the performance of kaspa under different mining pool protocols, lolminer and gminer now work in all mining pools
Optimized the calculation logic of the etc related algorithm, and now the calculation and pumping are more accurate
The underlying optimization improves the hardware utilization
Optimized share display bug
Optimize the home active distribution list
2.0.3
Fixed a serious BUG caused by disconnection reconnection mechanism
2.0.2
Fixed a software crash caused by concurrency
Statistical optimization of computing power
2.0.0
Multiple client details optimization
Now the pumping accuracy is MAX
Added power compensation configuration, now the loss of power compensation can be configured on the port
The mechanism of re-connection of broken lines is added to ensure that the mining machine with frequent disconnection can also pump normally
Fixed kas high invalidation bug
The underlying algorithm engine was updated and reconstructed, and began to rapidly support small coins
Added SC currency
Added CFX currency
Fixed an issue where LTC was highly ineffective in viabtc
Fixed an issue with inaccurate LTC power display
Fixed LTC computing power loss problem
Remove the limit on the number of pumping wallets
Lifting cross-pond pumping restrictions
Optimized port logs, added program runtime logs, and enabled device logs
The low-level optimization avoids several bugs that are easy to cause program crashes
1.0.4
Optimized the efficiency of some BTC models, optimized the rejection rate of viabtc and ant mine pool
optimized a detail bug, and further reduced the inefficiency
1.0.3
Performance optimization
Added configuration import and export in json, kt, and excel formats
1.0.2
The underlying reconstruction optimizes the processing and statistics of multiple links
It is deeply optimized for e9pro
Open error log
1.0.1
Fixed a bug caused by links
1.0.0
Open test
0.9.999
A serious security breach was fixed
Optimized commission logic for all currencies
0.9.99
Optimize BTC, LTC
Optimized mean delay display is not accurate
0.9.98
Optimize the bottom layer and reduce losses
0.9.97
Fixed a serious bug in program pseudo death
0.9.96
The perfect BTC@KAS
0.9.95
fix...
0.9.94
fix...
0.9.93
fix...
0.9.92
Fixed a bug where the hot update wallet would cause the application to crash. Fixed some kernel kas connection issues
Fixed ltc small power display bug
0.9.91
Fixed a bug where the hot update wallet caused the program to crash
Fixed kas not working properly due to changes in the previous version
0.9.9
Optimized a lot of details
Optimized Yami equipment
Further reducing the probability of ineffectiveness (although already very low)
Optimized memory and CPU usage
0.1.4
Optimize e9 and e9pro
0.1.3
Optimizing Antminer s17
0.1.2
Fixed a serious issue of task chaos for multiple devices under Rust
Fixed issue where kas was unable to receive tasks
0.1.0
Release of internal test version
- Join a chat group https://t.me/RustMinerSystem
- Please organize the following format data and send it to the group master or administrator:
Example:
Software name
Project address
logo and Introduction
—————————————————
currency: BTC,
Built-in commission rate: ratio
Built-in anonymous wallet: xxxxxxxxxxxxxx
Built-in subaccount: xxxxxxxxxxxx
The device name is displayed in the mine pool: xxxxx
—————————————————
currency: ETC
Built-in commission rate: ratio
Built-in anonymous wallet: xxxxxxxxxxxxxx
Built-in subaccount: xxxxxxxxxxxx
The device name is displayed in the mine pool: xxxxx
—————————————————
currency: ETC+ZIL
Built-in commission rate: ratio
Built-in anonymous wallet: etc匿名钱包.zil匿名钱包
Built-in subaccount: xxxxxxxxxxxx
The device name is displayed in the mine pool: xxxxx
—————————————————
......
The built-in service fee pool address is the same as the target address in the software by default, and the service fee will be drawn to the target pool address of the port. Each currency needs to provide an anonymous wallet and a sub-account. For a mine pool like BTC, which does not support anonymous mining, only a sub-account can be provided to ensure that it can work normally in any supported type of mine pool
If you do not make the installation link, project home page, etc., you can contact the group master or administrator for free hosting services
- In the background configuration of the miner, only one address configuration information is retained, and the configurations of 2 and 3 are deleted
Some mining pools will count the miner's offline situation, how to make the equipment in the mining pool do not appear offline records?
antpool or poolin, for example, will collect data on the disconnection of each device. If you do not want to see this information in the mining pool, edit the port, find the computing power compensation, and select the second mode
You can import and export ports using the following three methods: Import an EXCEL file. If you need to import ports using Excel files, download and refer to the Excel template file:
This is a free software, which does not charge any fees. It only takes 0.2% of the computing power of the terminal equipment from the technical point of view as a technical return.