Beast code in Giters

Thinkersbluff's repositories

DGUS-Reloaded_for_CR6-DWIN-SET_Component

Forks the Desuuuu DWIN T5UID1 touchscreen firmware, and refactors it for use on the CR6 T5L DWIN display . Must be used with the modified Klipper from https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-Klipper_Component

Language:PowerShellGPL-3.019 2 16

DGUS-Reloaded_for_CR6-Klipper_Component

Forks the version of Klipper modified by Desuuuu, to integrate DWIN_SET with Klipper through the motherboard/display UART interface.. Use only with this DWIN_SET: https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component

Language:CGPL-3.01400

Klipper-dgus_CR6

A project to port klipper-dgus to the CR6 DWIN T5L 272x480 display and extend/modify that project for my personal use.

Language:PythonGPL-3.0300

CR-6-touchscreen_Thinkersbluff_Fork

A cleaned-up version of the refactored DWIN_SET built with DGUS Tool 8.2.1.14. A final stable version has now been transferred to the upstream repository.

Language:PowerShell200

Personal-Klipper-files

Rather than try to manage my own configuration files separately from those of @K2Van within the one forked version of his repository, I use this repo to document and preserve my own version of the Klipper configuration files, for my CR6-SE and my Ender-3 printers. Please note that these files may contain errors, inefficiencies and poor programming practices. I make no warranty whatsoever that my files will be suitable for use by others.

GPL-3.0200

CR-6_Klipper

Thinkersbluff's fork of @K2Van's repository for Klipper firmware details for the Creality CR-6 printers.

GPL-3.0100

BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

Language:C++000

Thinkersbluff