Untz_Monome - THIS CODE DOES NOT WORK
Program an Adafruit Untz 8x8 or HellaUntz 8x16 to work as a monome.org controller via the mext protocol
This project was never completed as getting the USB descriptors right back then was a lot harder and I gave up. PLEASE don't rely on this code
This project uses the monome.org serial protocol defined at http://monome.org/docs/tech:serial which is used to control arrays of lighted buttons for creative control applications.
The Adafruit Untz is a monochrome (B/W) array of 8x8 or 8x16 keys.
----> https://www.adafruit.com/products/1919
----> https://www.adafruit.com/products/1999
Using an Arduino Leonardo, the serial protocol is read and written according to the mext serial protocol.
mext is used by the monome serialosc software which provides a host computer interface that may be used with
many types of creative software packages such as Max MSP that interface well with monome compatible
software but the serial protocol may easily be handled by your choice of programming languages including
Processing, Python, C, Ruby, or others.
This work is open source per the LICENSE file.
This work is abandoned and no warranty is here, at your own risk, no complaints if it doesn't work because It doesn't work fully
To identify your untz as a mext-device to serialosc, you'll need to reflash the FTDI eeprom to appear as a monome device, using buspirate's 'piratereflash' or similar.
-- os x /linux reflash instructions
Assuming you've got serialosc installed correctly, you should see the serialosc daemon running if you ps auxw | grep serial
To update your untznome's firmware, you'll need to:
- kill the
serialosc-detectorprocess - kill the
serialosc-device /dev/tty[...]process
Then you can reflash your monome. To get serialosc running again, kill the serialosc daemon process itself, and it will restart.