Thanyasit

ESP32_Web_Server_with_WiFi_and_ADC

ESP32 WebServer with WiFi(Access Point), ADC and LED by ESP-IDF

Air_Quality_Monitoring_System

Air Quality Monitoring System measures the concentration of gases such as CO, CO2, and NH3.

ESP32_Water_Flow_Meter

This code is designed for a water flow meter that measures the flow of water and displays it on an LCD screen. It is written in C++ and is intended to be used on an Arduino board.

Quadruped_Robot_Control

Quadruped Robot Control is an Arduino-based program developed for a competition. It is designed to control a robot with four legs, using Three servos for each leg. The robot can walk, climb, rotate, and other, and it has ultrasonic sensors to detect obstacles.

Arduino_Mega_Quadruped_Robot_Control

This program controls a robot using four servos and an ultrasonic sensor. It was developed for a competition using an Arduino Mega board. The robot's movement is controlled by changing the position of its four servos. The code includes predefined positions for standing, walking, climbing, and other movements.

Automatic_Animal_Feeder

This program controls an automatic animal feeder that dispenses food at specific intervals. The program uses an Arduino board, a servo motor, and a liquid crystal display (LCD) to control the feeder.

Control_Robot_with_Joystick_using_PIC16F877

This is a code for a robot with four-wheel control using a joystick and PIC16F877 microcontroller. The code includes functions for controlling the robot's movements in different directions, speed, angle, lift, and shooting.

ESP32_Modbus_MQTT

ESP32 Modbus(KP835) MQTT to Nodered

ESP32_MyAir_Lite

ESP32 MyAir Lite that uses the BME280 and Plantower PMS5003 and displat on LED alos sends the data bluetooth

MR.2_Robot_Controller

This program controls the MR.2 robot using an Arduino Mega microcontroller board. It uses various libraries such as Servo, Keypad, LiquidCrystal_I2C, and Wire to interact with the robot's hardware components, including the Two servos for each leg responsible for controlling the robot's movement.

BME280_Temperature-and-Humidity_Monitor_with_LINE-Notification

This program monitors the temperature and humidity using a BME280 sensor and sends notifications to your LINE account using the LINE Notify API.

Code_Assembly

Code_Assembly

Code_Matlab

Code_Python

Coin_Counter_with_LCD_Display

This is a simple Arduino program that counts coins and displays the count on an LCD display using the I2C protocol.

DHT11_Temperature_and_Humidity_Sensor_with_LineNotification

This project uses the DHT11 temperature and humidity sensor to monitor the environment and sends notifications via Line.

ESP32_NeoPixel_Ring

This program uses an ESP32 microcontroller and a NeoPixel ring to display different colored lights based on an analog input signal.

ESP32_Temperature_Sensor_with_BMP280_and_MQTT

This program reads the temperature from a BMP280 sensor connected to an ESP32 board and publishes it to an MQTT broker. The ESP32 will go to sleep for a specified amount of time and wake up periodically to read the temperature and publish it to the broker.

ESP32_Thermal_Scanner_with_LineNotify_and_Google_Sheets_Integration

This program uses an ESP32 microcontroller to measure temperature through a K3 Thermal Scanner, and sends notifications via Line Notify if the temperature exceeds a certain threshold. Additionally

ESP32_Water_Level_Monitoring_with_and_LineNotify

This is an Arduino program that reads values from a HC-SR04 ultrasonic sensor and sends them to the Line messaging app.

ESP32_Weather_Station_Logger

ESP32 Weather Station Logger collecting data in CSV format.

Heater_Control_Program

This repository contains code for controlling a heater using a microcontroller. The code is written in C language and is intended to be used with a PIC 16F877 microcontroller.

Light_Control_With_Color

This code allows you to control a light using a photoresistor and a button, and also displays different colors on a NeoPixel strip based on the light level

Liquid_Flow_Meter_with_Arduino

This code is for an Arduino-based liquid flow meter using a hall-effect sensor. The flow meter is designed to measure the rate of liquid flow and display it on a Liquid Crystal Display (LCD) in liters per hour

Motor_Speed_Controller

This program controls a motor speed controller using a push button and a potentiometer. The code is written in Arduino language and uses an Arduino board to control the motor. The program also includes a speaker output and LED indication.

OLD-Project

Basic and small project

PM2.5_Monitoring_System

This project is an air quality monitoring system using multiple PM sensors including Sensirion SPS30, Honeywell HPMA115S0, Plantower PMS7003, and Nova PM sensor SDS011.

Solar_Cell_Phone_Charger

This Arduino project is a solar cell phone charger that charges your phone when you insert money. The charger uses a solar panel to power an Arduino board

Thai_Baht_Vending_Machine_Calculator

This code is designed to operate a simple vending machine using a PIC 16F877 microcontroller. It can handle coins of different denominations and calculate the amount of money inserted into the machine.

Thanyasit

Portfolio