Contracts for the Celer State Guardian Network (SGN) V2.
yarn test
yarn report-gas:benchmark
yarn report-gas:summary
Check reports/gas_usage
.
yarn size-contracts
Check reports/contract_sizes.txt
.
-
cp .env.template .env
, then ensure all environment variables are set in.env
. -
Replace
INFURA-PROJECT-ID
suffix of the network endpoint in.env
, that you're going to use. -
Add private key of your account that would be used, in
.env
. Refer tohardhat.config.ts
for env param key. -
Deploy SGN and Staking contracts:
hardhat deploy --network <network> --tags SGNStaking
Deploy Bridge contract:
hardhat deploy --network <network> --tags Bridge
Deploy OriginalTokenVault contract:
Make sure to set ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER in .env to the Bridge address when deploying. Such as: ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER=0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22
Where 0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22 is the Bridge contract address
hardhat deploy --network <network> --tags OriginalTokenVault
Deploy PeggedTokenBridge contract:
Make sure to set ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER in .env to the Bridge address when deploying. Such as:
PEGGED_TOKEN_BRIDGE_SIGS_VERIFIER=0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22
Where 0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22 is the Bridge contract address
hardhat deploy --network <network> --tags PeggedTokenBridge
Deploy OriginalTokenVaultV2 contract:
Make sure to set ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER in .env to the Bridge address when deploying. Such as:
ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER=0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22
Where 0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22 is the Bridge contract address
hardhat deploy --network <network> --tags OriginalTokenVaultV2
Deploy PeggedTokenBridgeV2 contract:
Make sure to set ORIGINAL_TOKEN_VAULT_SIGS_VERIFIER in .env to the Bridge address when deploying. Such as:
PEGGED_TOKEN_BRIDGE_SIGS_VERIFIER=0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22
Where 0x67E5E3E54B2E4433CeDB484eCF4ef0f35Fe3Fb22 is the Bridge contract address
hardhat deploy --network <network> --tags PeggedTokenBridgeV2
This is the recommended way for most mainnet Etherscan variants.
Make sure the ETHERSCAN_API_KEY
is set correctly in .env
.
hardhat etherscan-verify --network <network> --license "GPL-3.0" --force-license
This is useful since most testnet Etherscan variants don't offer verification via the API.
- Generate the standard JSON input files:
source scripts/solt.sh
run_solt_write
- Then try:
solt verify --license 5 --network <network> solc-input-<contract>.json <deployed address> <contract name>
- If the second step fails, go to Etherscan and manually verify using the standard JSON input files.
This is used if the Blockscout variant requires "Sources and Metadata JSON".
hardhat sourcify --network <network>
This is used if the Blockscout variant requires a single source file, or in general as a last resort.
- Flatten the source files:
hardhat flatten <path-to-contract> > flattened.sol
- Edit
flattened.sol
. Remove the duplicateSPDX-License-Identifier
lines, keeping a single copy of
// SPDX-License-Identifier: GPL-3.0-only
and submit to Blockscout.
Sometimes you also need to remove the duplicate pragma solidity
lines.
proxy contract holds state and delegatecall all calls to actual impl contract. When upgrade, a new impl contract is deployed, and proxy is updated to point to the new contract. below from openzeppelin doc
User ---- tx ---> Proxy ----------> Implementation_v0
|
------------> Implementation_v1
|
------------> Implementation_v2
To minimize code fork, we add a new contract that inherits existing contract, eg. contract TokenUpgradable is Token
. Next we need to ensure that all states set in Token contract constructor (and its parent contracts) must be settable via a separate normal func like init
. This will allow Proxy contract to delegeteCall init and set proper values in Proxy's state, not the impl contract state. See MintSwapCanonicalTokenUpgradable.sol for example. We also need to either shadow Ownable._owner because when proxy delegateCall, in proxy state, Ownable._owner is not set and there is no other way to set it. Or use our own Ownable.sol which has internal func initOwner
add a new ts file for deploy, in deploy options, add proxy section, make sure the methodName and args match actual upgradable contract
proxy: {
proxyContract: "OptimizedTransparentProxy",
execute: {
// only called when proxy is deployed, it'll call Token contract.init
// with proper args
init: {
methodName: 'init',
args: [
process.env.MINT_SWAP_CANONICAL_TOKEN_NAME,
process.env.MINT_SWAP_CANONICAL_TOKEN_SYMBOL]
}
}
}
see deploy/pegged/tokens/008_mint_swap_canonical_token_upgradable.ts for example
hardhat deploy plugin tries to be smart and deploy ProxyAdmin only once for each chain, deploy impl contract then proxy contract