THX2112/Mozzi

#Mozzi

###sound synthesis library for Arduino

Tim Barrass
version 2015-05-11-20:23

####Modified for EuroArdCore

Add "#define EAC 1" to mozzi_config.h to use with EuroArdCore (already done).

Tested with "AUDIO_MODE STANDARD"

All examples should work without modification, aside from changing/adding controls.

To Do:

Both DAC channels.
Test "HIFI" mode.

Currently your Arduino can only beep like a microwave oven. Mozzi brings your Arduino to life by allowing it to produce much more complex and interesting growls, sweeps and chorusing atmospherics. These sounds can be quickly and easily constructed from familiar synthesis units like oscillators, delays, filters and envelopes.

You can use Mozzi to generate algorithmic music for an installation or performance, or make interactive sonifications of sensors, on a small, modular and super cheap Arduino, without the need for additional shields, message passing or external synths.

Features

16384 Hz sample rate, or experimental 32768 Hz rate.
8 bit or 14 bit audio output modes.
Variable control rate from 64 Hz upwards.
Useful basic audio toolkit: oscillators, samples, lines, envelopes, scheduling, filtering.
Fast ADC and other cpu-efficient code utilities to help keep audio running smoothly.
Example sketches for easy modification.
Readymade wavetables and a script to convert your own soundfiles for Mozzi.
Mozzi is designed to be easy to use, open source and extendable.

Installation

Download Mozzi from the top of this page and unzip it. It will probably have a name like "sensorium-Mozzi-2bee818". Rename the unzipped folder "Mozzi". Then, following the instructions from the Arduino libraries guide:

In the Arduino IDE, navigate to Sketch > Import Library. At the top of the drop down list, select the option to Add Library. Return to the Sketch > Import Library menu. You should now see the library at the bottom of the drop-down menu. It is ready to be used in your sketch.

Quick Start

To hear Mozzi, connect a 3.5mm audio jack with the centre wire to the PWM output on Digital Pin 9* on Arduino, and the ground to the Ground on the Arduino. Use this as a line out which you can plug into your computer and listen to with a sound program like Audacity. Try some examples from the File > Examples > Mozzi menu.

Below is a list of the Digital Pins used by Mozzi for STANDARD mode PWM audio out on different boards. Those which have been tested and reported to work have an x. Feedback about others is welcome.

x 9 Arduino Uno
x 9 Arduino Duemilanove
x 9 Arduino Nano
x 9 Arduino Pro Mini
x 9 Arduino Leonardo x 11 Arduino Mega *broken since Jan 2015 x 11 Freetronics EtherMega *broken since Jan 2015 x 9 Ardweeny
x 9 Boarduino ..14 Teensy
x B5 Teensy2
x B5(25) Teensy2++
..13 Sanguino

For details about HIFI mode, read the Mozzi core module documentation.

Using Mozzi

Here's a template for an empty Mozzi sketch:

#include <MozziGuts.h>   // at the top of your sketch

void setup() {
	startMozzi();
}

void updateControl(){
	// your control code
}

int updateAudio(){
	// your audio code which returns an int between -244 and 243
}

void loop() {
	audioHook();
}

There's a detailed example explaining the different parts here.

Documentation

There's documentation in the doc folder in the Mozzi download and online.
There is practical help on the learn page on the Mozzi site.
Start or look up a topic on the users forum.
Also, feel free to submit any issues on the GitHub Mozzi site.
Look for code and usage changes here.

Caveats and Workarounds

While Mozzi is running, the Arduino time functions millis(), micros(), delay(), and delayMicroseconds() are disabled.

Mozzi provides EventDelay() for scheduling instead of delay, and mozziMicros() for timing, with 61us resolution (in STANDARD mode).

Mozzi interferes with analogWrite(). In STANDARD audio mode, Mozzi takes over Timer0 (pins 5 and 6) and Timer1 (pins 9 and 10), but you can use the Timer2 pins, 3 and 11 (your board may differ). In HIFI mode, Mozzi uses Timer0, Timer1 (or Timer4 on some boards), and Timer2, so pins 3 and 11 are also out.

If you need PWM output (analogWrite()), you can do it on any digital pins using the technique in Mozzi>examples>11.Communication>Sinewave_PWM_pins_HIFI.

analogRead() is replaced by mozziAnalogRead(), which works in the background instead of blocking the processor.

####Last Resort The timers can be made available with pauseMozzi(), which suspends audio and control interrupts until you call unpauseMozzi().

If you enjoy using Mozzi for a project, or have extended it, we would be pleased to hear about it and provide support wherever possible. Contribute suggestions, improvements and bug fixes to the Mozzi wiki on Github, or Fork it to contribute directly to future developments.

Mozzi is a development of research into Mobile Sonification in the SweatSonics project.

##Contributions / Included Dependencies
Modified versions of the following libraries are included in the Mozzi download:

TimerOne library
FrequencyTimer2 library - now a fork with support for ATmega32u4 processors

Mozzi has also drawn on and been influenced by (among many others):

[xorshift] (http://www.jstatsoft.org/v08/i14/xorshift.pdf) random number generator, George Marsaglia, (2003)
ead~.c puredata external (creb library) Copyright (c) 2000-2003 by Tom Schouten (GPL2)
AF_precision_synthesis by Adrian Freed, 2009
Resonant filter posted to musicdsp.org by Paul Kellett, and fixed point version of the filter on [dave's blog of art and programming] (http://www.pawfal.org/dave/blog/2011/09/)
State Variable filter pseudocode at [musicdsp.org] (http://www.musicdsp.org/showone.php?id=23 and http://www.musicdsp.org/showone.php?id=142)
Various examples from Pure Data by Miller Puckette
Practical synthesis tutorials by Andy Farnell

THX2112 / Mozzi