SzczepanLeon's repositories
esp32-iec62056-component
IEC62056-21(iec1107) component for esp32
__esphome_components__
Custom-made components that I use for ESPHome.
alarmserver
IP Camera Alarm Server to MQTT
arduino-dsmr
Arduino library for interfacing with Dutch smart meters implementing DSMR
bthome-electricity-meter
Code for an impulse-based electricity meter using Puck.js and BTHome for Home Assistant
bthome-watermeter
An ESP-IDF project which counts pulses in ULP unit and sends data encoded in the BTHome format over BLE
culfw.esp8266
CUL/CUN 433/868 MHz CC1101 Transceiver mit WLAN-Schnittstelle fĂĽr FHEM - originally forked from svn2github/culfw (https://github.com/svn2github/culfw)
ecoNET-300-Home-Assistant-Integration
ecoNET300 Home Assistant is a custom integration for ecoNET300 devices.
electricity_meter_ble
Device for remote monitoring of electric meter readings KACKAD-1-MT
everblu-meters-esp8266
Fetch water usage data from Cyble meters for esp8266
Home-Assistant-Sensor-MC66C
Custom component that integrates the Kamstrup Multicall 66C heating system into Home Assistant
homeassistant-plum-ecomax
Plum ecoMAX boiler controller integration for Home Assistant.
OpenMQTTGateway
MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility & LORA.
PyPlumIO
PyPlumIO is a native ecoNET library for Plum ecoMAX controllers.
rtl_433_ESP
Trial port of the rtl_433 Library for use with OpenMQTTGateway on a ESP32 and a CC1101 Transceiver
supla-device
Create your own Supla device! This software can be used as a library for Arduino IDE, or can be used directly with ESP8266 RTOS SDK and with ESP IDF. It is also possible to compile and run it on Linux and in FreeRTOS.
wmbusmeters
Read the wireless mbus protocol to acquire utility meter readings.
XPowersLib
Arduino,CircuitPython,Micropython, esp-idf library for x-powers power management series