mini-rectifier
50V 8A rectifier board with screw terminals
Most of the caps on the Chinese boards aren't rated to the voltages I needed, so I made this.
Use capacitor_board for reduced ripple current at higher amperages.
If a heatsink is needed, the rectifier can be mounted on the bottom, folded over, and screwed to a heatsink.
If operating at higher voltages, be sure to add an appropriate bleeder resistor.
Output ready for JLCPCB
BOM
Part | Qty |
---|---|
WJ500V-5.08-2P | 2 |
GBU8005 | 1 |
UVY1H332MHD | 1 |