SunshadeCorp's repositories
can-service
Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
EasyBMS-master
Software for the EasyBMS master unit running on an Raspberry Pi and managing the slave units on one or several battery modules
battery-simulator
Simulates a battery setup with easybms slaves to test a control unit without having an actual battery.
battery-voltage-current-sensor
1000V 50A Sensor all-in-one sensor with 12Vpower Output
EasyBMS-slave
Firmware for the ESP on EasyBMS slave board connected to the battery modules
EasyBMS-testadapter-firmware
Firmware for the ESP on EasyBMS-testadapter end of line test board
modbus4mqtt
Modbus TCP <-> MQTT glue. YAML configuration. Robust.
EasyBMS-sensors
Hardware for sensors of EasyBMS slave unit for current and voltage measurement
EasyBMS-testadapter
Testboard for end of line test of EasyBMS slave boards hardware and software part as EAGLE project
EasyBMS_Hardware
EasyBMS slave board as EAGLE projects for MEB 12S, MEB 8S, generic version and development board.
GPIO-Adapter
GPIO-Adapter as RPi HAT for powering the Pi and connecting EconomizerLT units to drive high current relias