SudoMaker / sx126x_driver

Portable driver for Semtech SX126x series

sx126x_driver

Portable driver for Semtech SX126x series

Supported chips: SX1261, SX1262, SX1268.

Requirements

• C++14

Features

• Easy to use
• Should work on nearly all platforms
• Multiple instances
• No macros, no global scope shit, and thus no collisions with other libs

Usage

Write your own hardware abstraction layer (HAL) class and implement the Hal* functions below:

• HalGpioRead
• HalGpioWrite
• HalSpiTransfer - This should take care of chip select signal

It's very simple. Right?

And these if you have RF switches / external RF PA (optional):

• HalPreTx - Called before a TX operation
• HalPreRx - Called before a RX operation
• HalPostTx - Called when (1) TX_DONE (2) TX_TIMEOUT (3) before a RX operation
• HalPostRx - Called when (1) RX_TIMEOUT (2) before a TX operation

Enable DIOs & process GPIO interrupts by yourself. When DIO fires, simply call SX126x::ProcessIrqs(). Everything is thread-safe.

That's all. The code is well documented. Most usages are exactly same as the SX1280 mbed driver.

License

LGPLv3

Acknowledgements

This library is based on the SX126x mbed driver by Semtech S.A. See LICENSE-SEMTECH.txt for details.