StephiB

u8g2

U8glib library for monochrome displays, version 2

GxEPD2

Arduino Display Library for SPI E-Paper Displays

ArduinoCore-samd

Arduino Core for SAMD21 CPU

SPIMemory

Arduino library for Flash Memory Chips (SPI based only). Formerly SPIFlash

BOSSA

BOSSA is a flash programming utility for Atmel's SAM family of flash-based ARM microcontrollers. The motivation behind BOSSA is to create a simple, easy-to-use, open source utility to replace Atmel's SAM-BA software. BOSSA is an acronym for Basic Open Source SAM-BA Application to reflect that goal.

U8g2_Arduino

U8glib V2 library for Arduino

Si5351Arduino

Library for the Si5351 clock generator IC in the Arduino environment

DueTimer

⏳ Timer Library fully implemented for Arduino DUE

extEEPROM

Arduino library to support external I2C EEPROMs.

avrdude

AVRDUDE for Windows

epd-library-arduino

Arduino libraries for Waveshare e-paper series

TimerInterrupt_Generic

This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nRF52, Teensy, etc. These Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.

TinyCore

TinyCore boards / attiny 1 series Core, Arduino IDE Core, targets ATtiny 417 / 814 / 816 / 817 / 1614 / 1616 / 1617 / 3217 and similar MCUs

microUPDIcore

Arduino core for flashing mEDBG firmware onto the microUPDI programmer

TDC-GP22

An Arduino library for interfacing with an ACAM TDC-GP22 over SPI (For Arduino Due)

Arduino_GraphicMenu_Encoder

This sketch allows you to create a graphic menu with the help of a rotary encoder such as the KY-040. The code was created to be used with the SD1306 OLED display via the Adafruit_SD1106 and Adafruit_GFX libraries To convert the img use the online tool: http://javl.github.io/image2cpp/

PWFusion_AS3935_SPI

Arduino SPI Library for AS3935 Lightning Sensor

BossacArduinoDue

Programming Arduino Due with Bossac in Atmel Studio 6

AD5144A

Arduino library for I2C digital potentiometer AD5144A

GP1287AI_VFD_BOARD

megaTinyCore

Arduino core for the tinyAVR 0-series and 1-series chips

DueTC

Arduino DUE Timer Control for pins and interrupts

Systronix_AD5274

Arduino library for Analog Devices AD5272 and AD5274 Digital Rheostat

AD5231-Arduino-Library

Arduino Library for controlling the Analog Devices AD5231 SPI Digital Potentiometer (DigiPot)

GP1287Lib

Arduino library for GP1287 VFD displays

korgNutubeSpiceModel

spdif-dac

CS8416+AD1955 SPDIF DAC

DUE_RotaryClickEncoder

This is an example scetch for using rotary encoders with Arduino DUE (including button support)

gfx_aria