bareos-formula

A saltstack formula to install and configure BareOS, a master/slave server tool.

(This formula will probably be useful to install Bacula too, just changing the pkg variables in the pillar data).

OS Compatibility

Tested with:

Debian 9
CentOS 6 and 7
Ubuntu 16.04

Note

See the full Salt Formulas installation and usage instructions.

Formula Dependencies

This formula won't try to install or configure a database server, just tries to configure the BareOS database if possible. In case you want to use Postgresql or MySQL, use the respective formulas. If your database is on another host, you just need to configure the database host/user/password in the pillar.

TODO

The database management is REALLY basic yet and should be used with care.

`bareos`

Installs and configures all the bareos components (includes bareos.director, bareos.storage and bareos.client.

`bareos.director`

Installs and configures the bareos director, and starts the associated service.

`bareos.storage`

Installs and configures the bareos storage, and starts the associated service.

`bareos.client`

Meta-state that includes bareos.filedaemon, baeros.bconsole and bareos.traymonitor.

`bareos.filedaemon`

Installs and configures the bareos filedaemon, and starts the associated service.

`bareos.bconsole`

Installs and configures the bareos console.

`bareos.repo`

Configures the upstream bareos' repo (true, by default).

`bareos.traymonitor`

Installs and configures the bareos tray-monitor.

Example Pillar

BareOS daemons' configuration, since version >= 16.2.2, can be done by mean of config files or config directories/subdirectories.

The formula, to ease management, follows this logic:

By default, the formula will setup and use the upstream BareOS repo.
If no pillar key named config exists for a given daemon, it will be intalled and the default configuration included in the package (or a custom configuration set by any other mean) will be used. No configuration will be attempted.

This means the current subdirectories configuration schema provided by the package will be used (see Configuration Layout.
If a pillar key named config is present for a given daemon, it will be installed and configured. This formula will use the "old approach" of setting all the configuration for the daemon in a single file, ignoring the rest of the included subdirectories. This may seem counter-intuitive at first, because reading different small configuration files is easier. But the advantage is that, when you remove a key/value from the bareos pillar, the config file will be regenerated and you won't need to remove lingering files, or keep pillar keys with 'remove/delete/disable' values.

The configuration for each BareOS daemon (director, storage, filedaemon) is generated from pillar data if a key config exist for such daemon, ie:

 bareos:

   director:
     ...
     config:
       ...
       ...


If no `config` section is given, no configuration will be perfomed, and the
existing configuration will be used (or the one provided by the package).

The `config` sections are ordered by resource type, like in the following example.

Keys names are case insensitive.

Keys that can be repeated multiple times (like `run`, in Schedules) should be
written as lists, and they will be expanded accordingly.

Resources that require a `Name` will use the provided one, or the dict name if no
`Name` is provided.

Resources that require `Password`, will use the provided password in each `config`
section, or will use the password set in 'bareos:default_password'. If none is
specified, this formula will use "default_bareos_formula_password" as the default
password).

The include file `@` parameter is an 'special case' of the resource_type, and should
be written as a list instead of a dict, as shown below.

 bareos:
   daemon:
     config:
       resource_type1:
         resource1_name:
           param1: value1
           param2: 2
           param3:
             sub_param3a:
               param3b: value3b
               param3c: true
               param3d:
                 - value3d_1
                 - value3d_2
                 - value3d_3
               param3e: value_3e
             sub_param3b: 3
         resource2_name:
           name: someothername
           param1: value1

       resource_type2:
         resource3_name:
           param2: value2

       '@':
         - 'include_file1'
         - '|"/etc/bareos/generate_configuration_to_stdout.sh"'
         - '|"sh -c \"/etc/bareos/generate_client_configuration_to_stdout.sh clientname=client1.example.com\""'

will create the following config file:

 resource_type1 {

     Name = "resource1_name"

     param1 = "value1"
     param2 = 2
     param3 {

         sub_param3a {

             param3b = "value3b"
             param3c = True
             param3d = "value3d_1"
             param3d = "value3d_2"
             param3d = "value3d_3"
             param3e = "value_3e"
         }
         sub_param3b = 3
     }
 }

 resource_type1 {

     Name = "someothername"

     param1 = "value1"

 }

 resource_type2 {

     Name = "resource3_name"

     param2 = "value2"

 }

 @include_file1
 @|"/etc/bareos/generate_configuration_to_stdout.sh"
 @|"sh -c \"/etc/bareos/generate_client_configuration_to_stdout.sh clientname=client1.example.com\""


See *bind/pillar.example* for a full example.

Contributions

Contributions are always welcome. All development guidelines you have to know are:

write clean code (proper YAML+Jinja syntax, no trailing whitespaces, no empty lines with whitespaces, LF only)
set sane default settings
test your code
update README.rst doc

SteffenRitschel / bareos-formula