The Slicer class is designed to generate G-code instructions for 3D printing tasks. It provides methods to control movements and extrusion for your printer.
const slicer = new Slicer(nozzleDiameter, layerHeight, filamentDiameter, movementSpeed, printSpeed, heightSpeed, retractSpeed, retractLength);nozzleDiameter: Diameter of the printer nozzle.layerHeight: Height of each printed layer.filamentDiameter: Diameter of the filament.movementSpeed: Default movement speed.printSpeed: Default printing speed.heightSpeed: Default height change speed.retractSpeed: Retraction speed.retractLength: Retraction length.extrusionWidth: Width of extrusion.currentPosition: Current position of the printer.eRoundFactor: Rounding factor for extrusion calculations.gcode: Accumulated G-code instructions.
calculateFilamentLength(distance): Calculate filament length based on distance.calculateDistance(x1, y1, x2, y2): Calculate distance between two points.generateExtrusionGcode(x1, y1, x2, y2): Generate G-code for extrusion move.addGcodeLine(gcode, speed): Add a G-code line to the instructions.extrusionMove(x, y, speed): Perform an extrusion move.extrusionMoveTo(x, y, speed): Move to a position with extrusion.extrude(length, speed): Extrude filament.moveZ(z, retract, speed): Move in the Z direction.move(x, y, z, speed): Move in the X, Y, and optionally Z directions.moveTo(x, y, z, speed): Move to a position in the X, Y, and optionally Z directions.retract(e): Perform retraction.unretract(e): Cancel retraction.bedHeat(temp): Heat the bed to the specified temperature.bedHeatWait(temp): Heat the bed and wait.toolHeat(temp): Heat the tool to the specified temperature.toolHeatWait(temp): Heat the tool and wait.setSpeed(speed): Set the movement speed.disableAll(): Disable all components.home(): Home the printer.getGcode(): Get the accumulated G-code instructions.printRectangle(x, y, startDirection, isClockwise): Prints a RectangleprintRectanglefilled(x, y, fillDensity): Prints a filled Rectangle
run the slicer.class.js, above the class is an example