Slord6 / Spice

A programming language for 'Golfing' in an assembly-like environment

Spice

A programming language for 'Golfing' in an assembly-like environment.

TL;DR

• Spice is an interpreted assembly-like language with a handful of operators:
  • ADD, SUB, MUL, DIV, MOD, PUT, GET, SWI, BRK, ALS, OUT, LOD, SIN, COS, TAN, POW, REA, CLR, LEN, NUL
• Spice programs are split into two sections; declaration and instruction split with an @ character.
• All values are dynamically sized double arrays with the exception of string literals, "Some string", which may be used in OUT statements, but not stored
• The end of instructions is denoted by a user-defined character - the first character of the program

An example program is given below:

;input;result;@
OUT "Input a number:";
REA input;
OUT "Number is" input;
MOD 10 input result;
OUT input "mod 10 is" result;
ALS OUT SAY;
SAY "Now SAY is a valid operator";
LOD .\module.spice input;
BRK 1 0 result;

Interpreter

Invoking a Spice program takes the following format:

spice.exe .\prog.spice outputLevel

Where spice.exe is the interpreter, .\prog.spice is a valid Spice source file and outputLevel is a number denoting the verbosity of the program.

Output levels are:

• PROGRAM = 0 (Least verbose, program output only)
• ERROR = 1
• DEBUG = 2
• INFO = 3 (Most verbose)

Declaration

In the above program, ; is declared as the program delimiter (note newline characters are still accepted with a non-newline separator). Following the delimiter declaration is the declaration of all variables used in the program. In a module the order of varable declaration is important, as values passed to a module may be loaded into each variable in declaration order (see LOD).

Instructions may only be used after declaration is complete, denoted by the '@' character.

Operators

In any case where a single value is expected but an array is passed, the value resolves to the 0th element (in both setting and getting values). Empty arrays have an implicit value of 0. For example, ADD a b c where a, b and c are all arrays is equivalent to (not valid Spice code): ADD a[0] b[0] c[0].

ADD, SUB, MUL, DIV, MOD, POW

Add, subtract, multiply, divide, modulus, power

Format:

<OP> x y z

Explanation:

The operator is applied to x and y and the result stored in z. x and y may be value literals or variable names. z must be a variable name.

Eg.

• ADD 3 5 result is the equivalent to result = 3 + 5
• POW 2 3 result is the equivalent to result = 2^3

SIN, COS, TAN

Sin, Cos, Tan

Format:

<OP> x y

Explanation:

The operator is applied to x and the result stored in y. x may be a value literal or variable name. y must be a variable name.

Eg.

• SIN 5 result is the equivalent to result = Sin(5)

PUT

Insert into array

Format:

PUT x y z

Explanation:

The value of z is inserted into the array y at position x. x is floored, to become the index. z may be a value literal or a variable. A list must be initalised with a value to be able to insert into it - eg ADD 50 0 y will add 50 at index 0. The value of x must not be outside the range 0 to array length - 1.

Eg.

• PUT 1.2 array 6 is the equivalent to array[1] = 6
• PUT 5.7 array 10.8 is the equivalent to array[5] = 10.8

GET

Retrieve from array

Format:

GET x y z

Explanation:

The value at index x of the array, y, is stored in the variable z. x is floored, to become the index. The value of x must not be outside the range 0 to array length - 1.

Eg.

• GET 1.2 array var is the equivalent to var = array[1]
• GET 5 array var is the equivalent to var = array[5]

SWI

Format:

SWI x y z

Explanation:

If x is less than y, the program counter is set to the zero-indexed operation number of z. The operation count begins from after the '@' program split. x, y and z may all be value literals or variable names.

Eg.

• SWI 1.2 5 6 results in the program jumping to line 6 as 1.2 is less than 5
• SWI 2 0 0 results in the program continuing as if SWI had been a NUL statement

BRK

Format:

BRK x y z

Explanation:

If x is less than y, the program ends. Otherwise, z is set to the absolute difference between x and y. x and y may both be value literals or variable names, z must be a variable name.

Eg.

• BRK 1.2 5 var results in the program terminating as 1.2 is less than 5
• BRK 3 1 var results in the program continuing, with var having the value 2

ALS

Alias an operator

Format:

ALS x y

Explanation:

The OP x (which must be a valid OP keyword, eg, ADD, OUT, PUT etc) is aliased to y.

Eg.

• ALS GET RETRIEVE results in RETRIEVE being an alias to GET
• ALS BRK END_IF_LSS_THN results in END_IF_LSS_THN being an alias to BRK

OUT

Output to the console

Format:

OUT a b c d <...> x y z

Explanation:

The value literals or variable values of any following argument is printed to the console. The arguments may be a double value literal, a variable name or a "string literal". A string literal may span multiple lines,

Eg.

• OUT var "hello" 200.2 results in the value of var, the string hello and 200.2 being printed to the console.

LOD

Invoke a Spice source file with the given argument(s)

Format:

LOD source.path arguments z

Explanation:

The 'module' in the source file at source.path is loaded into its own context. Modules from the standard library may be accessed through std::module.spice.

The declared values for the module are set as they are initalised to the value(s) of arguments. To instead set the value of ony the first variable to the enitre value of arguments the syntax ^arguments should be used.

Modules must declare the variable return which is passed back to the calling program and assigned to the passed variable z. Module invocations may be nested indefinitely.

Eg. Module source (module.spice):

;input1;input2;return@
OUT input1 input2;
ADD 100 0 return;

This module is called in the following context:

...
PUT 0 array 50
PUT 1 array 100
LOD .\module.spice array result

This results in the values 50 and 100 being output to the console. result is equal to 100 when control returns to the main program.

If instead LOD .\module.spice array result was used, the module would have input1 initalised to [50, 100] and would output "[50, 100] [0]".

REA

Read value(s) from the console

Format:

REA input

Explanation:

The program outputs a '>' character and waits for the user to input some value(s). Values must be double literals or hex (denoted by # eg #AA0BB9) separated by ', ' (note the space character).

Eg.

• REA value where user enters 1200 results in value being set to 1200
• REA value where user enters #0x4007B425F202107B results in value being set to 2.962963

CLR

Reset a variable

Format:

CLR x

Explanation:

The value of x is cleared. x is set to an empty array/an implicit value of 0.

Eg.

• CLR value - value is equal to []/0

LEN

Get the length of a variable

Format:

LEN x y

Explanation:

The length of x is stored in y.

Eg.

• LEN arr count - count is equal to the length of arr

NUL

A no-op

Format:

NUL a b c <...> x y z

Explanation:

A no-op, nothing happens. Any arguments are not resolved, and so it may be used as a method for adding comments. A NUL op does count towards line/op count for SWI statements.

Eg.

• NUL This is a comment 100! woo-hoo! - Nothing happens.