Birdwatcher
Debug tool for Milvus 2.0 project. This tool connects to etcd and inspect some status of the Milvus system.
Get Started
Prerequisite
go 1.18 or higher
Install birdwatcher
download source and run with go command
git clone https://github.com/milvus-io/birdwatcher
cd birdwatcher
go install
tips: As JimB notice in comments:
If there are replace or exclude directives in the module, the correct installation method is to clone the source and install it.
How to use
connect to etcd
❯ birdwatcher
# execute connect command, using default config, equal to connect --etcd localhost:2379 --rootPath by-dev
Offline: connect
Using meta path: by-dev/meta/
✔ Milvus(by-dev): show collection
...
connect to remote instance etcd with other basePath
❯ birdwatcher
Offline: connect --etcd [ip]:[port] --rootPath instanceName
Using meta path: instanceName/meta/
✔ Milvus(instanceName):
inspect some meta
Milvus(by-dev): show collections
================================================================================
Collection ID: 434393323906469185 Collection Name:gosdk_index_example
Partitions:
- Partition ID:434393323906469186 Partition Name:_default
Fields:
- Field ID: 0 Field Name: RowID Field Type: Int64
- Field ID: 1 Field Name: Timestamp Field Type: Int64
- Field ID: 100 Field Name: ID Field Type: Int64
- Primary Key, AutoID: false
- Field ID: 101 Field Name: Year Field Type: Int32
- Field ID: 102 Field Name: Vector Field Type: FloatVector
- Type Param dim: 8
Consistency Level: Strong
✔ Milvus(by-dev): █
backup etcd
Milvus(by-dev): backup
found 37 keys, at revision 533816, starting backup...
Backing up ... 100%(37/37)
backup etcd for prefix by-dev/meta done, stored in file: bw_etcd_ALL.220707-152246.bak.gz
help
And use help
command to check other commands.