Sienci-Labs / gsender

Connect to and control Grbl-based CNCs with ease

https://sienci.com/gsender/

Sienci-Labs/gsender Issues

Stuttering movement using game controller
Updated 3 days ago1
Linux releases throwing errors on "Checking for update"
Updated 6 days ago
Feature request - maintenance warning on startup
Updated 16 days ago
Fixed Tool Length Sensor not working
Updated 20 days ago
Feature Request: Different Probe seek speeds
Updated 20 days ago
Enhancement - tool change workflow improvements
Updated 20 days ago1
feature request - positioning with a camera
Updated 23 days ago
Enhancement - Allow setting of retract height after probing surface.
Updated 23 days ago
Feature Request - Resume Job / Power Outage
Closed 23 days ago2
does not end job
Updated a month ago
stalled job
Updated a month ago
No toolchange prompt
Closed 2 months ago6
feature - disable job summary
Closed 2 months ago5
Docker build is failing
Closed 2 months ago3
Option in Go To function to not go to Z
Closed 2 months ago3
Enhancement - move errors and job history to standalone files
Updated 2 months ago
Feature - Configure Spindle Delay
Updated 2 months ago8
Diagonal jogging not working intuitively
Closed 2 months ago5
1.4.3 Rapid/Precise jogging presets don't work
Closed 2 months ago7
Heightmap
Updated 3 months ago3
Cannot use 4 corner "jog" buttons
Closed 3 months ago4
SLB disconnects when homing.
Closed 3 months ago6
SLB firmware error
Closed 3 months ago2
v.1.4.4 The machine continues to move in jog mode after the joystick button is released
Closed 3 months ago3
Zeroing causes probe to plunge beyond zero point
Closed 3 months ago4
Randomly losing "Program Events" settings
Closed 3 months ago3
New version thinks my machine is locked all the time
Closed 3 months ago15
Can't unlock machine
Closed 3 months ago
Z jogging using game controller stick plunges too far
Closed 3 months ago1
Workspace changing to P1 after job completion
Closed 3 months ago2
Native build for Mac M1/ARM?
Updated 3 months ago2
All the links to Linux builds are 404
Closed 3 months ago1
Request: execute gcode with A axis
Updated 3 months ago4
Macro "A" axis g-code command replaced by "Y"
Updated 3 months ago1
Gsender doesnt play well with lower resolutions.
Closed 3 months ago3
Remote connection doesnt have quick jog location unless re-homed
Updated 3 months ago1
"Go To" button moves in metric system even tho set to inches.
Closed 3 months ago1
Sending $$ to fluidnc crashes gsender
Updated 4 months ago9
discardVirtualMemory not found since unisntall old version to version 1.4.3
Closed 4 months ago2
FEATURE REQUEST: Ability to send gcode via python script
Closed 4 months ago1
Edge 1.3.10 Job list duplicates some entries
Closed 4 months ago4
1.4.1 throwing modal errors possibly surrounding spindle delay
Closed 4 months ago5
1.4.1 doesn't respond to jog controls in main UI
Closed 4 months ago4
Tool Change Standard Re-zero wrong z height
Closed 4 months ago1
Feature request - 4th axis on location panel
Updated 5 months ago1
Remote session has no access to settings
Closed 5 months ago4
1.4 quick corner buttons slams into limits
Closed 5 months ago5
gsender 1.3.10 EDGE misidentifies certain COM ports as grblHAL
Closed 5 months ago3
gSender 1.3.10 EDGE Outline button can become non-responsive
Closed 5 months ago1
gsender 1.3.10 EDGE disconnect/reconnect required upon Home in Z-limit if machine is not unlocked.
Updated 5 months ago1